[sensor]
Sensor_type   =stSnsImx335Obj           ;sensor name
Mode          = WDR_MODE_NONE           ;WDR_MODE_NONE = 0
                                        ;WDR_MODE_BUILT_IN = 1
                                        ;WDR_MODE_QUDRA = 2
                                        ;WDR_MODE_2To1_LINE = 3
                                        ;WDR_MODE_2To1_FRAME = 4
                                        ;WDR_MODE_2To1_FRAME_FULL_RATE = 5
                                        ;WDR_MODE_3To1_LINE = 6
                                        ;WDR_MODE_3To1_FRAME = 7
                                        ;WDR_MODE_3To1_FRAME_FULL_RATE = 8
                                        ;WDR_MODE_4To1_LINE = 9
                                        ;WDR_MODE_4To1_FRAME = 10
                                        ;WDR_MODE_4To1_FRAME_FULL_RATE = 11
DllFile   = /usr/lib/sensors/libsns_imx335.so            ;sensor lib path


[mode]
input_mode =0                           ;INPUT_MODE_MIPI = 0
                                        ;INPUT_MODE_SUBLVDS = 1
                                        ;INPUT_MODE_LVDS = 2 ...etc
raw_bitness = 12

[mipi]
;----------only for mipi_dev---------
data_type = 2                        	;raw data type: 8/10/12/14 bit
                                        ;DATA_TYPE_RAW_8BIT = 0,
                                        ;DATA_TYPE_RAW_10BIT,
                                        ;DATA_TYPE_RAW_12BIT,
                                        ;DATA_TYPE_RAW_14BIT,
                                        ;DATA_TYPE_RAW_16BIT,
                                        ;DATA_TYPE_YUV420_8BIT_NORMAL,
                                        ;DATA_TYPE_YUV420_8BIT_LEGACY,
                                        ;DATA_TYPE_YUV422_8BIT,
lane_id = 0|1|2|3|-1|-1|-1|-1|          ;lane_id: -1 - disable

[isp_image]
Isp_x      =0
Isp_y      =0
Isp_W      =2592
Isp_H      =1944
Isp_FrameRate=20
Isp_Bayer  =0   ;BAYER_RGGB=0, BAYER_GRBG=1, BAYER_GBRG=2, BAYER_BGGR=3


[vi_dev]
Input_mod    = VI_MODE_MIPI
Work_mod     = VI_WORK_MODE_1Multiplex
Mask_num     = 2
Mask_0       = 0xFFF00000
Mask_1       = 0x0
Scan_mode    = VI_SCAN_PROGRESSIVE
Data_seq     = VI_DATA_SEQ_YUYV
Vsync   =1      ; vertical synchronization signal
                ;VI_VSYNC_PULSE,
VsyncNeg=1      ;Polarity of the vertical synchronization signal
                ;VI_VSYNC_NEG_HIGH = 0,
                ;VI_VSYNC_NEG_LOW /*if VIU_VSYNC_E
Hsync  =0       ;Attribute of the horizontal synchronization signal
                ;VI_HSYNC_VALID_SINGNAL = 0,
                ;VI_HSYNC_PULSE,
HsyncNeg =0     ;Polarity of the horizontal synchronization signal
                ;VI_HSYNC_NEG_HIGH = 0,
                ;VI_HSYNC_NEG_LOW
VsyncValid =1   ;Attribute of the valid vertical synchronization signal
                ;VI_VSYNC_NORM_PULSE = 0,
                ;VI_VSYNC_VALID_SINGAL,
VsyncValidNeg =0;Polarity of the valid vertical synchronization signal
                ;VI_VSYNC_VALID_NEG_HIGH = 0,
                ;VI_VSYNC_VALID_NEG_LOW
Timingblank_HsyncHfb =0     ;Horizontal front blanking width
Timingblank_HsyncAct =1280  ;Horizontal effetive width
Timingblank_HsyncHbb =0     ;Horizontal back blanking width
Timingblank_VsyncVfb =0     ;Vertical front blanking height
Timingblank_VsyncVact =720  ;Vertical effetive width
Timingblank_VsyncVbb=0      ;Vertical back blanking height
Timingblank_VsyncVbfb =0    ;Even-field vertical front blanking height(interlace, invalid progressive)
Timingblank_VsyncVbact=0    ;Even-field vertical effetive width(interlace, invalid progressive)
Timingblank_VsyncVbbb =0    ;Even-field vertical back blanking height(interlace, invalid progressive)
InputDataType=1 ;VI_DATA_TYPE_YUV = 0,VI_DATA_TYPE_RGB = 1,
DataRev      =FALSE ;Data reverse. FALSE = 0; TRUE = 1
DevRect_w=2592  ;
DevRect_h=1944  ;
DevRect_x=200   ;
DevRect_y=20    ;

Combine_mode =0 ;Y/C composite or separation mode
                ;VI_COMBINE_COMPOSITE = 0 /*Composite mode */
                ;VI_COMBINE_SEPARATE,     /*Separate mode */
Comp_mode    =0 ;Component mode (single-component or dual-component)
                ;VI_COMP_MODE_SINGLE = 0, /*single component mode */
                ;VI_COMP_MODE_DOUBLE = 1, /*double component mode */
Clock_edge   =1 ;Clock edge mode (sampling on the rising or falling edge)
                ;VI_CLK_EDGE_SINGLE_UP=0, /*rising edge */
                ;VI_CLK_EDGE_SINGLE_DOWN, /*falling edge */

;----- only for bt656 ----------
FixCode   =0    ;BT656_FIXCODE_1 = 0,
                ;BT656_FIXCODE_0
FieldPolar=0    ;BT656_FIELD_POLAR_STD = 0
                ;BT656_FIELD_POLAR_NSTD
DataPath  =1    ;ISP enable or bypass
                ;VI_PATH_BYPASS    = 0,/* ISP bypass */
                ;VI_PATH_ISP       = 1,/* ISP enable */
                ;VI_PATH_RAW       = 2,/* Capture raw data, for debug */
FullLinesStd=1875

[vi_chn]
CapRect_X    =0
CapRect_Y    =0
CapRect_Width=2592
CapRect_Height=1944
DestSize_Width=2592
DestSize_Height=1944
CapSel       =2 ;Frame/field select. ONLY used in interlaced mode
                ;VI_CAPSEL_TOP = 0,                  /* top field */
                ;VI_CAPSEL_BOTTOM,                   /* bottom field */
                ;VI_CAPSEL_BOTH,                     /* top and bottom field */

PixFormat    =26;PIXEL_FORMAT_YVU_SEMIPLANAR_420 = 26 ...etc
CompressMode =0 ;COMPRESS_MODE_NONE = 0
                ;COMPRESS_MODE_SEG =1 ...etc