diff --git a/br-ext-chip-goke/configs/gk7201v200_lite_defconfig b/br-ext-chip-goke/configs/gk7201v200_lite_defconfig
index 65ca7ff0..cb31ed9c 100644
--- a/br-ext-chip-goke/configs/gk7201v200_lite_defconfig
+++ b/br-ext-chip-goke/configs/gk7201v200_lite_defconfig
@@ -63,7 +63,7 @@ BR2_PACKAGE_LIBOGG_OPENIPC=y
BR2_PACKAGE_LINUX_FIRMWARE_OPENIPC=y
BR2_PACKAGE_MAJESTIC_FONTS=y
BR2_PACKAGE_MAJESTIC_WEBUI=y
-# BR2_PACKAGE_MAJESTIC=y
+# BR2_PACKAGE_MAJESTIC is not set
BR2_PACKAGE_MBEDTLS_OPENIPC=y
BR2_PACKAGE_MOTORS=y
BR2_PACKAGE_OPUS_OPENIPC=y
diff --git a/br-ext-chip-goke/configs/gk7205v500_lite_defconfig b/br-ext-chip-goke/configs/gk7205v500_lite_defconfig
index 85460999..c35e86eb 100644
--- a/br-ext-chip-goke/configs/gk7205v500_lite_defconfig
+++ b/br-ext-chip-goke/configs/gk7205v500_lite_defconfig
@@ -63,7 +63,7 @@ BR2_PACKAGE_LIBOGG_OPENIPC=y
BR2_PACKAGE_LINUX_FIRMWARE_OPENIPC=y
BR2_PACKAGE_MAJESTIC_FONTS=y
BR2_PACKAGE_MAJESTIC_WEBUI=y
-BR2_PACKAGE_MAJESTIC=y
+# BR2_PACKAGE_MAJESTIC is not set
BR2_PACKAGE_MBEDTLS_OPENIPC=y
BR2_PACKAGE_MOTORS=y
BR2_PACKAGE_OPUS_OPENIPC=y
diff --git a/general/package/goke-osdrv-gk7205v500/files/script/load_goke b/general/package/goke-osdrv-gk7205v500/files/script/load_goke
index 53321de5..7d5af5eb 100755
--- a/general/package/goke-osdrv-gk7205v500/files/script/load_goke
+++ b/general/package/goke-osdrv-gk7205v500/files/script/load_goke
@@ -1,8 +1,13 @@
#!/bin/sh
-####################Variables Definition##########################
+#
+# This is part of OpenIPC.org project | 2025.02.18
+#
+
+# Board
+board=demo
# SoC detect
-CHIP_TYPE=$(ipcinfo --chip-name)
+chipid=$(ipcinfo --chip-name)
# Memory config
mem_start=0x40000000 # phy mem start
@@ -13,7 +18,6 @@ mem_total=${mem_total:=64}
os_mem_size=$(fw_printenv -n osmem | tr -d 'M')
os_mem_size=${os_mem_size:=32}
-BOARD=demo
YUV_TYPE0=0 # 0 -- raw, 1 --DC, 2 --bt1120, 3 --bt656
cd /lib/modules/$(uname -r)/goke/
@@ -23,30 +27,30 @@ report_error() {
exit 1
}
-check_allocator() {
- allocator=$(grep mmz_allocator /proc/cmdline)
- if [ -z "${allocator}" ]; then
- if [ ${mem_total} -ge 128 ]; then
- set_allocator cma
- else
- set_allocator xmedia
- fi
- fi
+calc_mmz_info() {
+ mmz_start=$(echo "$mem_start $os_mem_size" |
+ awk 'BEGIN { temp = 0; }
+ {
+ temp = $1/1024/1024 + $2;
+ }
+ END { printf("0x%x00000\n", temp); }')
+
+ mmz_size=$(echo "$mem_total $os_mem_size" |
+ awk 'BEGIN { temp = 0; }
+ {
+ temp = $1 - $2;
+ }
+ END { printf("%dM\n", temp); }')
+ echo "mmz_start: $mmz_start, mmz_size: $mmz_size"
}
insert_osal() {
- check_allocator
-
- MMZ=$(awk -F '=' '$1=="mmz"{print $2}' RS=" " /proc/cmdline)
- if [ -z "$MMZ" ]; then
- modprobe xm_osal mmz_allocator=xmedia mmz=anonymous,0,$mmz_start,$mmz_size || report_error
- else
- modprobe xm_osal mmz_allocator=cma mmz=$MMZ || report_error
- fi
+ calc_mmz_info
+ modprobe xm_osal mmz_allocator=xmedia mmz=anonymous,0,$mmz_start,$mmz_size || report_error
}
insert_detect() {
- modprobe xm_sysconfig chip=$CHIP_TYPE sensors=unknown g_cmos_yuv_flag=$YUV_TYPE0 board=$BOARD
+ modprobe xm_sysconfig chip=${chipid} sensors=unknown g_cmos_yuv_flag=$YUV_TYPE0 board=${board}
insert_osal
insmod xm_base.ko
modprobe xm_isp
@@ -88,7 +92,7 @@ insert_isp() {
}
insert_isp_piris() {
- if [ "$CHIP_TYPE" == "gk7605v100" -a "$BOARD" == "demo" ]; then
+ if [ "${chipid}" == "gk7605v100" -a "${board}" == "demo" ]; then
modprobe xm_piris
fi
}
@@ -97,7 +101,7 @@ insert_ko() {
if [ "$SENSOR" == "bt656" ] || [ "$SENSOR" == "jxf23_dc" ]; then
YUV_TYPE0=1
fi
- modprobe xm_sysconfig chip=$CHIP_TYPE sensors=$SENSOR g_cmos_yuv_flag=$YUV_TYPE0 board=$BOARD
+ modprobe xm_sysconfig chip=${chipid} sensors=$SENSOR g_cmos_yuv_flag=$YUV_TYPE0 board=${board}
insert_osal
insmod xm_base.ko
insmod xm_sys.ko
@@ -172,23 +176,6 @@ load_usage() {
echo -e "for example: ./load_goke -i -sensor imx307 -osmem 32M -board demo -yuv0 0\n"
}
-calc_mmz_info() {
- mmz_start=$(echo "$mem_start $os_mem_size" |
- awk 'BEGIN { temp = 0; }
- {
- temp = $1/1024/1024 + $2;
- }
- END { printf("0x%x00000\n", temp); }')
-
- mmz_size=$(echo "$mem_total $os_mem_size" |
- awk 'BEGIN { temp = 0; }
- {
- temp = $1 - $2;
- }
- END { printf("%dM\n", temp); }')
- echo "mmz_start: $mmz_start, mmz_size: $mmz_size"
-}
-
######################parse arg###################################
b_arg_sensor0=0
b_arg_sensor1=0
@@ -221,7 +208,7 @@ for arg in $@; do
if [ $b_arg_board -eq 1 ]; then
b_arg_board=0
- BOARD=$arg
+ board=$arg
fi
case $arg in
@@ -261,8 +248,6 @@ if [ $os_mem_size -ge $mem_total ]; then
exit
fi
-calc_mmz_info
-
#######################Action###############################
if [ $# -lt 1 ]; then