diff --git a/general/overlay/etc/init.d/S70vendor b/general/overlay/etc/init.d/S70vendor
new file mode 100755
index 00000000..9e819094
--- /dev/null
+++ b/general/overlay/etc/init.d/S70vendor
@@ -0,0 +1,18 @@
+#!/bin/sh
+
+# load vendor specific drivers
+# 
+vendor=$(ipcinfo -v)
+status=$(check_mac)
+
+log_vendor() {
+  logger -s -p daemon.info -t ${vendor} "$1"
+}
+
+case "$1" in
+  start)
+	[ -n "${status}" ] && log_vendor "${status}"
+	echo -e '\nLoading of kernel modules...'
+	load_${vendor} -i
+	;;
+esac
diff --git a/general/overlay/usr/sbin/check_mac b/general/overlay/usr/sbin/check_mac
new file mode 120000
index 00000000..756c71c5
--- /dev/null
+++ b/general/overlay/usr/sbin/check_mac
@@ -0,0 +1 @@
+extutils
\ No newline at end of file
diff --git a/general/overlay/usr/sbin/extutils b/general/overlay/usr/sbin/extutils
index d09f0a0f..10edaaee 100755
--- a/general/overlay/usr/sbin/extutils
+++ b/general/overlay/usr/sbin/extutils
@@ -13,6 +13,9 @@ case "${CMD}" in
   cli)
 	yaml-cli -i /etc/majestic.yaml $@
   ;;
+  sensor_cli)
+	yaml-cli -i /etc/sensor/$(fw_printenv -n sensor).yaml $@
+  ;;
   ipctool)
 	IPCTOOL=/tmp/ipctool
 	if [ ! -x $IPCTOOL ]; then
@@ -21,6 +24,11 @@ case "${CMD}" in
 		echo "The ipctool installed as remote GitHub plugin"
 	fi
 	$IPCTOOL $@
+  ;;
+  check_mac)
+	if [ "$(fw_printenv -n ethaddr)" = "00:00:23:34:45:66" ]; then
+		XMMAC="$(ipcinfo --xm-mac)" && [ -n "${XMMAC}" ] && [ ! "Nothing found." = "${XMMAC}" ] && fw_setenv ethaddr ${XMMAC} && reboot -f || echo "Warning. Wired network interface has default MAC address, please change it."
+	fi
   ;;
 	*)
   ;;
diff --git a/general/package/allwinner-osdrv-v83x/allwinner-osdrv-v83x.mk b/general/package/allwinner-osdrv-v83x/allwinner-osdrv-v83x.mk
index a6a8ec69..8fbb039c 100644
--- a/general/package/allwinner-osdrv-v83x/allwinner-osdrv-v83x.mk
+++ b/general/package/allwinner-osdrv-v83x/allwinner-osdrv-v83x.mk
@@ -10,9 +10,6 @@ ALLWINNER_OSDRV_V83X_LICENSE = MIT
 ALLWINNER_OSDRV_V83X_LICENSE_FILES = LICENSE
 
 define ALLWINNER_OSDRV_V83X_INSTALL_TARGET_CMDS
-	$(INSTALL) -m 755 -d $(TARGET_DIR)/etc/init.d
-	# $(INSTALL) -m 755 -t $(TARGET_DIR)/etc/init.d $(BR2_EXTERNAL_ALLWINNER_PATH)/package/allwinner-osdrv-v83x/files/script/S95allwinner
-
 	$(INSTALL) -m 755 -d $(TARGET_DIR)/etc/sensors
 	# $(INSTALL) -m 644 -t $(TARGET_DIR)/etc/sensors $(BR2_EXTERNAL_ALLWINNER_PATH)/package/allwinner-osdrv-v83x/files/sensor/config/*
 
@@ -22,7 +19,6 @@ define ALLWINNER_OSDRV_V83X_INSTALL_TARGET_CMDS
 
 	$(INSTALL) -m 755 -d $(TARGET_DIR)/usr/bin
 	# $(INSTALL) -m 755 -t $(TARGET_DIR)/usr/bin $(BR2_EXTERNAL_ALLWINNER_PATH)/package/allwinner-osdrv-v83x/files/script/load*
-	# $(INSTALL) -m 755 -t $(TARGET_DIR)/usr/bin $(BR2_EXTERNAL_ALLWINNER_PATH)/package/allwinner-osdrv-v83x/files/sample/*
 
 	$(INSTALL) -m 755 -d $(TARGET_DIR)/usr/lib/sensors
 	# $(INSTALL) -m 644 -t $(TARGET_DIR)/usr/lib/sensors $(BR2_EXTERNAL_ALLWINNER_PATH)/package/allwinner-osdrv-v83x/files/sensor/*.so
diff --git a/general/package/allwinner-osdrv-v83x/files/script/S95allwinner b/general/package/allwinner-osdrv-v83x/files/script/S95allwinner
deleted file mode 100755
index 66581256..00000000
--- a/general/package/allwinner-osdrv-v83x/files/script/S95allwinner
+++ /dev/null
@@ -1,80 +0,0 @@
-#!/bin/sh
-
-DAEMON="majestic"
-PIDFILE="/var/run/$DAEMON.pid"
-
-DAEMON_ARGS="-s"
-
-# shellcheck source=/dev/null
-[ -r "/etc/default/$DAEMON" ] && . "/etc/default/$DAEMON"
-
-load_majestic() {
-	printf 'Starting %s: ' "$DAEMON"
-	[ -f /usr/bin/$DAEMON ] || echo -en "DISABLED, "
-	# shellcheck disable=SC2086 # we need the word splitting
-	[ -f /etc/coredump.conf ] && . /etc/coredump.conf
-	if [ "$coredump_enabled" ]; then
-		[ "$(yaml-cli -i /etc/majestic.yaml -g .watchdog.timeout)" -lt "30" ] && yaml-cli -i /etc/majestic.yaml -s .watchdog.timeout 30
-		ulimit -c unlimited && echo "|/usr/sbin/sendcoredump.sh" >/proc/sys/kernel/core_pattern
-	fi
-	start-stop-daemon -b -m -S -q -p "$PIDFILE" -x "/usr/bin/$DAEMON" \
-		-- $DAEMON_ARGS
-	status=$?
-	if [ "$status" -eq 0 ]; then
-		echo "OK"
-	else
-		echo "FAIL"
-	fi
-	return "$status"
-}
-
-# The daemon does not create a pidfile, and use "-m" to instruct start-stop-daemon to create one.
-start() {
-	logger -s -p daemon.info -t allwinner "Check MAC for allwinner devices"
-	if [ "$(fw_printenv -n ethaddr)" = "00:00:23:34:45:66" ]; then
-		logger -s -p daemon.info -t allwinner "The eth0 interface has a lousy MAC, let's try to change it.."
-		XMMAC="$(ipcinfo --xm-mac)" && [ -n "${XMMAC}" ] && fw_setenv ethaddr ${XMMAC} && reboot -f || logger -s -p daemon.info -t allwinner "It is not possible to install a new MAC on the eth0 interface.."
-	else
-		logger -s -p daemon.info -t allwinner "The eth0 interface has a correct MAC - $(fw_printenv -n ethaddr)"
-	fi
-	#
-	logger -s -p daemon.info -t allwinner "Loading of kernel modules and initialization of the video system has started"
-	export TZ=$(cat /etc/TZ)
-	#load_allwinner
-	#
-	export SENSOR=$(fw_printenv -n sensor)
-	#load_majestic
-}
-
-stop() {
-	printf 'Stopping %s: ' "$DAEMON"
-	[ -f /usr/bin/$DAEMON ] || echo -en "DISABLED, "
-	start-stop-daemon -K -q -p "$PIDFILE"
-	status=$?
-	if [ "$status" -eq 0 ]; then
-		rm -f "$PIDFILE"
-		echo "OK"
-	else
-		echo "FAIL"
-	fi
-	return "$status"
-}
-
-restart() {
-	stop
-	sleep 1
-	reload
-}
-
-reload() {
-	load_majestic
-}
-
-case "$1" in
-	start|stop|restart|reload)
-		"$1";;
-	*)
-		echo "Usage: $0 {start|stop|restart|reload}"
-		exit 1
-esac
-
diff --git a/general/package/allwinner-osdrv-v83x/files/script/load_allwinner b/general/package/allwinner-osdrv-v83x/files/script/load_allwinner
index e69de29b..1a248525 100755
--- a/general/package/allwinner-osdrv-v83x/files/script/load_allwinner
+++ b/general/package/allwinner-osdrv-v83x/files/script/load_allwinner
@@ -0,0 +1 @@
+#!/bin/sh
diff --git a/general/package/ambarella-osdrv-s3l/ambarella-osdrv-s3l.mk b/general/package/ambarella-osdrv-s3l/ambarella-osdrv-s3l.mk
index a7b1de4a..835f36e8 100644
--- a/general/package/ambarella-osdrv-s3l/ambarella-osdrv-s3l.mk
+++ b/general/package/ambarella-osdrv-s3l/ambarella-osdrv-s3l.mk
@@ -11,9 +11,6 @@ AMBARELLA_OSDRV_S3L_LICENSE_FILES = LICENSE
 
 
 define AMBARELLA_OSDRV_S3L_INSTALL_TARGET_CMDS
-	$(INSTALL) -m 755 -d $(TARGET_DIR)/etc/init.d
-	$(INSTALL) -m 755 -t $(TARGET_DIR)/etc/init.d $(BR2_EXTERNAL_AMBARELLA_PATH)/package/ambarella-osdrv-s3l/files/script/S95ambarella
-
 	$(INSTALL) -m 755 -d $(TARGET_DIR)/etc/sensors
 	# $(INSTALL) -m 644 -t $(TARGET_DIR)/etc/sensors $(BR2_EXTERNAL_AMBARELLA_PATH)/package/ambarella-osdrv-s3l/files/sensor/config/*.cfg
 
@@ -21,13 +18,12 @@ define AMBARELLA_OSDRV_S3L_INSTALL_TARGET_CMDS
 	$(INSTALL) -m 644 -t $(TARGET_DIR)/lib/modules/3.10.104/ambarella $(BR2_EXTERNAL_AMBARELLA_PATH)/package/ambarella-osdrv-s3l/files/kmod/*.ko
 
 	$(INSTALL) -m 755 -d $(TARGET_DIR)/usr/bin
-	$(INSTALL) -m 755 -t $(TARGET_DIR)/usr/bin $(BR2_EXTERNAL_AMBARELLA_PATH)/package/ambarella-osdrv-s3l/files/script/load_ambarella
+	$(INSTALL) -m 755 -t $(TARGET_DIR)/usr/bin $(BR2_EXTERNAL_AMBARELLA_PATH)/package/ambarella-osdrv-s3l/files/script/load*
 
 	$(INSTALL) -m 755 -d $(TARGET_DIR)/usr/lib/sensors
 	# $(INSTALL) -m 644 -t $(TARGET_DIR)/usr/lib/sensors $(BR2_EXTERNAL_AMBARELLA_PATH)/package/ambarella-osdrv-s3l/files/sensor/*.so
 
 	$(INSTALL) -m 755 -d $(TARGET_DIR)/usr/lib
-
 	# $(INSTALL) -m 644 -t $(TARGET_DIR)/usr/lib/ $(BR2_EXTERNAL_AMBARELLA_PATH)/package/ambarella-osdrv-s3l/files/lib/xxx.so
 endef
 
diff --git a/general/package/ambarella-osdrv-s3l/files/script/S95ambarella b/general/package/ambarella-osdrv-s3l/files/script/S95ambarella
deleted file mode 100755
index 5fed0f8a..00000000
--- a/general/package/ambarella-osdrv-s3l/files/script/S95ambarella
+++ /dev/null
@@ -1,78 +0,0 @@
-#!/bin/sh
-
-DAEMON="majestic"
-PIDFILE="/var/run/$DAEMON.pid"
-
-DAEMON_ARGS="-s"
-
-# shellcheck source=/dev/null
-[ -r "/etc/default/$DAEMON" ] && . "/etc/default/$DAEMON"
-
-load_majestic() {
-	printf 'Starting %s: ' "$DAEMON"
-	[ -f /usr/bin/$DAEMON ] || echo -en "DISABLED, "
-	# shellcheck disable=SC2086 # we need the word splitting
-	[ -f /etc/coredump.conf ] && . /etc/coredump.conf
-	if [ "$coredump_enabled" ]; then
-		[ "$(yaml-cli -i /etc/majestic.yaml -g .watchdog.timeout)" -lt "30" ] && yaml-cli -i /etc/majestic.yaml -s .watchdog.timeout 30
-		ulimit -c unlimited && echo "|/usr/sbin/sendcoredump.sh" >/proc/sys/kernel/core_pattern
-	fi
-	start-stop-daemon -b -m -S -q -p "$PIDFILE" -x "/usr/bin/$DAEMON" \
-		-- $DAEMON_ARGS
-	status=$?
-	if [ "$status" -eq 0 ]; then
-		echo "OK"
-	else
-		echo "FAIL"
-	fi
-	return "$status"
-}
-
-# The daemon does not create a pidfile, and use "-m" to instruct start-stop-daemon to create one.
-start() {
-	logger -s -p daemon.info -t anyka "Check MAC for Xiongmai devices"
-	if [ "$(fw_printenv -n ethaddr)" = "00:00:23:34:45:66" ]; then
-		logger -s -p daemon.info -t anyka "The eth0 interface has a lousy MAC, let's try to change it.."
-		XMMAC="$(ipcinfo --xm-mac)" && [ -n "${XMMAC}" ] && fw_setenv ethaddr ${XMMAC} && reboot -f || logger -s -p daemon.info -t anyka "It is not possible to install a new MAC on the eth0 interface.."
-	else
-		logger -s -p daemon.info -t anyka "The eth0 interface has a correct MAC - $(fw_printenv -n ethaddr)"
-	fi
-	#
-	logger -s -p daemon.info -t anyka "Loading of kernel modules and initialization of the video system has started"
-	export TZ=$(cat /etc/TZ)
-	#load_anyka
-	#
-	#load_majestic
-}
-
-stop() {
-	printf 'Stopping %s: ' "$DAEMON"
-	[ -f /usr/bin/$DAEMON ] || echo -en "DISABLED, "
-	start-stop-daemon -K -q -p "$PIDFILE"
-	status=$?
-	if [ "$status" -eq 0 ]; then
-		rm -f "$PIDFILE"
-		echo "OK"
-	else
-		echo "FAIL"
-	fi
-	return "$status"
-}
-
-restart() {
-	stop
-	sleep 1
-	reload
-}
-
-reload() {
-	load_majestic
-}
-
-case "$1" in
-	start|stop|restart|reload)
-		"$1";;
-	*)
-		echo "Usage: $0 {start|stop|restart|reload}"
-		exit 1
-esac
diff --git a/general/package/fullhan-osdrv-fh8852v100/files/script/S95fullhan b/general/package/fullhan-osdrv-fh8852v100/files/script/S95fullhan
deleted file mode 100755
index 9de94a48..00000000
--- a/general/package/fullhan-osdrv-fh8852v100/files/script/S95fullhan
+++ /dev/null
@@ -1,78 +0,0 @@
-#!/bin/sh
-
-DAEMON="majestic"
-PIDFILE="/var/run/$DAEMON.pid"
-
-DAEMON_ARGS="-s"
-
-# shellcheck source=/dev/null
-[ -r "/etc/default/$DAEMON" ] && . "/etc/default/$DAEMON"
-
-load_majestic() {
-	printf 'Starting %s: ' "$DAEMON"
-	[ -f /usr/bin/$DAEMON ] || echo -en "DISABLED, "
-	# shellcheck disable=SC2086 # we need the word splitting
-	[ -f /etc/coredump.conf ] && . /etc/coredump.conf
-	if [ "$coredump_enabled" ]; then
-		[ "$(yaml-cli -i /etc/majestic.yaml -g .watchdog.timeout)" -lt "30" ] && yaml-cli -i /etc/majestic.yaml -s .watchdog.timeout 30
-		ulimit -c unlimited && echo "|/usr/sbin/sendcoredump.sh" >/proc/sys/kernel/core_pattern
-	fi
-	start-stop-daemon -b -m -S -q -p "$PIDFILE" -x "/usr/bin/$DAEMON" \
-		-- $DAEMON_ARGS
-	status=$?
-	if [ "$status" -eq 0 ]; then
-		echo "OK"
-	else
-		echo "FAIL"
-	fi
-	return "$status"
-}
-
-# The daemon does not create a pidfile, and use "-m" to instruct start-stop-daemon to create one.
-start() {
-	logger -s -p daemon.info -t fullhan "Check MAC for Xiongmai devices"
-	if [ "$(fw_printenv -n ethaddr)" = "00:00:23:34:45:66" ]; then
-		logger -s -p daemon.info -t fullhan "The eth0 interface has a lousy MAC, let's try to change it.."
-		XMMAC="$(ipcinfo --xm-mac)" && [ -n "${XMMAC}" ] && fw_setenv ethaddr ${XMMAC} && reboot -f || logger -s -p daemon.info -t fullhan "It is not possible to install a new MAC on the eth0 interface.."
-	else
-		logger -s -p daemon.info -t fullhan "The eth0 interface has a correct MAC - $(fw_printenv -n ethaddr)"
-	fi
-	#
-	logger -s -p daemon.info -t fullhan "Loading of kernel modules and initialization of the video system has started"
-	export TZ=$(cat /etc/TZ)
-	#load_fullhan
-	#
-	#load_majestic
-}
-
-stop() {
-	printf 'Stopping %s: ' "$DAEMON"
-	[ -f /usr/bin/$DAEMON ] || echo -en "DISABLED, "
-	start-stop-daemon -K -q -p "$PIDFILE"
-	status=$?
-	if [ "$status" -eq 0 ]; then
-		rm -f "$PIDFILE"
-		echo "OK"
-	else
-		echo "FAIL"
-	fi
-	return "$status"
-}
-
-restart() {
-	stop
-	sleep 1
-	reload
-}
-
-reload() {
-	load_majestic
-}
-
-case "$1" in
-	start|stop|restart|reload)
-		"$1";;
-	*)
-		echo "Usage: $0 {start|stop|restart|reload}"
-		exit 1
-esac
diff --git a/general/package/fullhan-osdrv-fh8852v100/fullhan-osdrv-fh8852v100.mk b/general/package/fullhan-osdrv-fh8852v100/fullhan-osdrv-fh8852v100.mk
index e5fe2654..1beb5a23 100644
--- a/general/package/fullhan-osdrv-fh8852v100/fullhan-osdrv-fh8852v100.mk
+++ b/general/package/fullhan-osdrv-fh8852v100/fullhan-osdrv-fh8852v100.mk
@@ -10,9 +10,6 @@ FULLHAN_OSDRV_FH8852V100_LICENSE = MIT
 FULLHAN_OSDRV_FH8852V100_LICENSE_FILES = LICENSE
 
 define FULLHAN_OSDRV_FH8852V100_INSTALL_TARGET_CMDS
-	$(INSTALL) -m 755 -d $(TARGET_DIR)/etc/init.d
-	$(INSTALL) -m 755 -t $(TARGET_DIR)/etc/init.d $(BR2_EXTERNAL_FULLHAN_PATH)/package/fullhan-osdrv-fh8852v100/files/script/S95fullhan
-
 	$(INSTALL) -m 755 -d $(TARGET_DIR)/lib/firmware
 	$(INSTALL) -m 644 -t $(TARGET_DIR)/lib/firmware $(BR2_EXTERNAL_FULLHAN_PATH)/package/fullhan-osdrv-fh8852v100/files/firmware/*
 
@@ -20,7 +17,7 @@ define FULLHAN_OSDRV_FH8852V100_INSTALL_TARGET_CMDS
 	$(INSTALL) -m 644 -t $(TARGET_DIR)/lib/modules/3.0.8/fullhan $(BR2_EXTERNAL_FULLHAN_PATH)/package/fullhan-osdrv-fh8852v100/files/kmod/*.ko
 
 	$(INSTALL) -m 755 -d $(TARGET_DIR)/usr/bin
-	$(INSTALL) -m 755 -t $(TARGET_DIR)/usr/bin $(BR2_EXTERNAL_FULLHAN_PATH)/package/fullhan-osdrv-fh8852v100/files/script/load_fullhan
+	$(INSTALL) -m 755 -t $(TARGET_DIR)/usr/bin $(BR2_EXTERNAL_FULLHAN_PATH)/package/fullhan-osdrv-fh8852v100/files/script/load*
 
 	$(INSTALL) -m 755 -d $(TARGET_DIR)/usr/lib
 	$(INSTALL) -m 644 -t $(TARGET_DIR)/usr/lib/ $(BR2_EXTERNAL_FULLHAN_PATH)/package/fullhan-osdrv-fh8852v100/files/lib/*.so
diff --git a/general/package/fullhan-osdrv-fh8852v200/files/script/S95fullhan b/general/package/fullhan-osdrv-fh8852v200/files/script/S95fullhan
deleted file mode 100755
index f57df16e..00000000
--- a/general/package/fullhan-osdrv-fh8852v200/files/script/S95fullhan
+++ /dev/null
@@ -1,79 +0,0 @@
-#!/bin/sh
-
-DAEMON="majestic"
-PIDFILE="/var/run/$DAEMON.pid"
-
-DAEMON_ARGS="-s"
-
-# shellcheck source=/dev/null
-[ -r "/etc/default/$DAEMON" ] && . "/etc/default/$DAEMON"
-
-load_majestic() {
-	printf 'Starting %s: ' "$DAEMON"
-	[ -f /usr/bin/$DAEMON ] || echo -en "DISABLED, "
-	# shellcheck disable=SC2086 # we need the word splitting
-	[ -f /etc/coredump.conf ] && . /etc/coredump.conf
-	if [ "$coredump_enabled" ]; then
-		[ "$(yaml-cli -i /etc/majestic.yaml -g .watchdog.timeout)" -lt "30" ] && yaml-cli -i /etc/majestic.yaml -s .watchdog.timeout 30
-		ulimit -c unlimited && echo "|/usr/sbin/sendcoredump.sh" >/proc/sys/kernel/core_pattern
-	fi
-	start-stop-daemon -b -m -S -q -p "$PIDFILE" -x "/usr/bin/$DAEMON" \
-		-- $DAEMON_ARGS
-	status=$?
-	if [ "$status" -eq 0 ]; then
-		echo "OK"
-	else
-		echo "FAIL"
-	fi
-	return "$status"
-}
-
-# The daemon does not create a pidfile, and use "-m" to instruct start-stop-daemon to create one.
-start() {
-	logger -s -p daemon.info -t fullhan "Check MAC for Xiongmai devices"
-	if [ "$(fw_printenv -n ethaddr)" = "00:00:23:34:45:66" ]; then
-		logger -s -p daemon.info -t fullhan "The eth0 interface has a lousy MAC, let's try to change it.."
-		XMMAC="$(ipcinfo --xm-mac)" && [ -n "${XMMAC}" ] && fw_setenv ethaddr ${XMMAC} && reboot -f || logger -s -p daemon.info -t fullhan "It is not possible to install a new MAC on the eth0 interface.."
-	else
-		logger -s -p daemon.info -t fullhan "The eth0 interface has a correct MAC - $(fw_printenv -n ethaddr)"
-	fi
-	#
-	logger -s -p daemon.info -t fullhan "Loading of kernel modules and initialization of the video system has started"
-	export TZ=$(cat /etc/TZ)
-	load_fullhan
-	#
-	export SENSOR=$(fw_printenv -n sensor)
-	load_majestic
-}
-
-stop() {
-	printf 'Stopping %s: ' "$DAEMON"
-	[ -f /usr/bin/$DAEMON ] || echo -en "DISABLED, "
-	start-stop-daemon -K -q -p "$PIDFILE"
-	status=$?
-	if [ "$status" -eq 0 ]; then
-		rm -f "$PIDFILE"
-		echo "OK"
-	else
-		echo "FAIL"
-	fi
-	return "$status"
-}
-
-restart() {
-	stop
-	sleep 1
-	reload
-}
-
-reload() {
-	load_majestic
-}
-
-case "$1" in
-	start|stop|restart|reload)
-		"$1";;
-	*)
-		echo "Usage: $0 {start|stop|restart|reload}"
-		exit 1
-esac
diff --git a/general/package/fullhan-osdrv-fh8852v200/fullhan-osdrv-fh8852v200.mk b/general/package/fullhan-osdrv-fh8852v200/fullhan-osdrv-fh8852v200.mk
index 3d8cc184..4101dde8 100644
--- a/general/package/fullhan-osdrv-fh8852v200/fullhan-osdrv-fh8852v200.mk
+++ b/general/package/fullhan-osdrv-fh8852v200/fullhan-osdrv-fh8852v200.mk
@@ -10,9 +10,6 @@ FULLHAN_OSDRV_FH8852V200_LICENSE = MIT
 FULLHAN_OSDRV_FH8852V200_LICENSE_FILES = LICENSE
 
 define FULLHAN_OSDRV_FH8852V200_INSTALL_TARGET_CMDS
-	$(INSTALL) -m 755 -d $(TARGET_DIR)/etc/init.d
-	$(INSTALL) -m 755 -t $(TARGET_DIR)/etc/init.d $(BR2_EXTERNAL_FULLHAN_PATH)/package/fullhan-osdrv-fh8852v200/files/script/S95fullhan
-
 	$(INSTALL) -m 755 -d $(TARGET_DIR)/lib/firmware
 	$(INSTALL) -m 644 -t $(TARGET_DIR)/lib/firmware $(BR2_EXTERNAL_FULLHAN_PATH)/package/fullhan-osdrv-fh8852v200/files/firmware/*
 
@@ -20,7 +17,7 @@ define FULLHAN_OSDRV_FH8852V200_INSTALL_TARGET_CMDS
 	$(INSTALL) -m 644 -t $(TARGET_DIR)/lib/modules/4.9.129/fullhan $(BR2_EXTERNAL_FULLHAN_PATH)/package/fullhan-osdrv-fh8852v200/files/kmod/*.ko
 
 	$(INSTALL) -m 755 -d $(TARGET_DIR)/usr/bin
-	$(INSTALL) -m 755 -t $(TARGET_DIR)/usr/bin $(BR2_EXTERNAL_FULLHAN_PATH)/package/fullhan-osdrv-fh8852v200/files/script/load_fullhan
+	$(INSTALL) -m 755 -t $(TARGET_DIR)/usr/bin $(BR2_EXTERNAL_FULLHAN_PATH)/package/fullhan-osdrv-fh8852v200/files/script/load*
 
 	$(INSTALL) -m 755 -d $(TARGET_DIR)/usr/lib
 	$(INSTALL) -m 644 -t $(TARGET_DIR)/usr/lib/ $(BR2_EXTERNAL_FULLHAN_PATH)/package/fullhan-osdrv-fh8852v200/files/lib/*.so
diff --git a/general/package/goke-osdrv-gk710x/goke-osdrv-gk710x.mk b/general/package/goke-osdrv-gk710x/goke-osdrv-gk710x.mk
index f965f357..f61c786a 100644
--- a/general/package/goke-osdrv-gk710x/goke-osdrv-gk710x.mk
+++ b/general/package/goke-osdrv-gk710x/goke-osdrv-gk710x.mk
@@ -18,9 +18,6 @@ else ifeq ($(CHIP),gk7102s)
 endif
 
 define GOKE_OSDRV_GK710X_INSTALL_TARGET_CMDS
-	$(INSTALL) -m 755 -d $(TARGET_DIR)/etc/init.d
-	$(INSTALL) -m 755 -t $(TARGET_DIR)/etc/init.d $(BR2_EXTERNAL_GOKE_PATH)/package/goke-osdrv-gk710x/files/script/S95goke
-
 	$(INSTALL) -m 755 -d $(TARGET_DIR)/etc/sensors
 	# $(INSTALL) -m 644 -t $(TARGET_DIR)/etc/sensors $(BR2_EXTERNAL_GOKE_PATH)/package/goke-osdrv-gk710x/files/sensor/config/*.bin
 	$(INSTALL) -m 644 -t $(TARGET_DIR)/etc/sensors $(BR2_EXTERNAL_GOKE_PATH)/package/goke-osdrv-gk710x/files/sensor/config/sc1135.bin
@@ -34,7 +31,7 @@ define GOKE_OSDRV_GK710X_INSTALL_TARGET_CMDS
 	$(INSTALL) -m 644 -t $(TARGET_DIR)/lib/modules/3.4.43-Goke/goke $(BR2_EXTERNAL_GOKE_PATH)/package/goke-osdrv-gk710x/files/sensor/*.ko
 
 	$(INSTALL) -m 755 -d $(TARGET_DIR)/usr/bin
-	$(INSTALL) -m 755 -t $(TARGET_DIR)/usr/bin $(BR2_EXTERNAL_GOKE_PATH)/package/goke-osdrv-gk710x/files/script/load_*
+	$(INSTALL) -m 755 -t $(TARGET_DIR)/usr/bin $(BR2_EXTERNAL_GOKE_PATH)/package/goke-osdrv-gk710x/files/script/load*
 	$(INSTALL) -m 755 -t $(TARGET_DIR)/usr/bin $(BR2_EXTERNAL_GOKE_PATH)/package/goke-osdrv-gk710x/files/script/ircut_demo
 
 	# $(INSTALL) -m 755 -d $(TARGET_DIR)/usr/lib/sensors
diff --git a/general/package/goke-osdrv-gk7205v200/files/script/S95goke b/general/package/goke-osdrv-gk7205v200/files/script/S95goke
deleted file mode 100755
index 793d0e8b..00000000
--- a/general/package/goke-osdrv-gk7205v200/files/script/S95goke
+++ /dev/null
@@ -1,79 +0,0 @@
-#!/bin/sh
-
-DAEMON="majestic"
-PIDFILE="/var/run/$DAEMON.pid"
-
-DAEMON_ARGS="-s"
-
-# shellcheck source=/dev/null
-[ -r "/etc/default/$DAEMON" ] && . "/etc/default/$DAEMON"
-
-load_majestic() {
-	printf 'Starting %s: ' "$DAEMON"
-	[ -f /usr/bin/$DAEMON ] || echo -en "DISABLED, "
-	# shellcheck disable=SC2086 # we need the word splitting
-	[ -f /etc/coredump.conf ] && . /etc/coredump.conf
-	if [ "$coredump_enabled" ]; then
-		[ "$(yaml-cli -i /etc/majestic.yaml -g .watchdog.timeout)" -lt "30" ] && yaml-cli -i /etc/majestic.yaml -s .watchdog.timeout 30
-		ulimit -c unlimited && echo "|/usr/sbin/sendcoredump.sh" >/proc/sys/kernel/core_pattern
-	fi
-	start-stop-daemon -b -m -S -q -p "$PIDFILE" -x "/usr/bin/$DAEMON" \
-		-- $DAEMON_ARGS
-	status=$?
-	if [ "$status" -eq 0 ]; then
-		echo "OK"
-	else
-		echo "FAIL"
-	fi
-	return "$status"
-}
-
-# The daemon does not create a pidfile, and use "-m" to instruct start-stop-daemon to create one.
-start() {
-	logger -s -p daemon.info -t goke "Check MAC for Xiongmai devices"
-	if [ "$(fw_printenv -n ethaddr)" = "00:00:23:34:45:66" ]; then
-		logger -s -p daemon.info -t goke "The eth0 interface has a lousy MAC, let's try to change it.."
-		XMMAC="$(ipcinfo --xm-mac)" && [ -n "${XMMAC}" ] && fw_setenv ethaddr ${XMMAC} && reboot -f || logger -s -p daemon.info -t goke "It is not possible to install a new MAC on the eth0 interface.."
-	else
-		logger -s -p daemon.info -t goke "The eth0 interface has a correct MAC - $(fw_printenv -n ethaddr)"
-	fi
-	#
-	logger -s -p daemon.info -t goke "Loading of kernel modules and initialization of the video system has started"
-	export TZ=$(cat /etc/TZ)
-	load_goke -i
-	#
-	export SENSOR=$(fw_printenv -n sensor)
-	load_majestic
-}
-
-stop() {
-	printf 'Stopping %s: ' "$DAEMON"
-	[ -f /usr/bin/$DAEMON ] || echo -en "DISABLED, "
-	start-stop-daemon -K -q -p "$PIDFILE"
-	status=$?
-	if [ "$status" -eq 0 ]; then
-		rm -f "$PIDFILE"
-		echo "OK"
-	else
-		echo "FAIL"
-	fi
-	return "$status"
-}
-
-restart() {
-	stop
-	sleep 1
-	reload
-}
-
-reload() {
-	load_majestic
-}
-
-case "$1" in
-	start|stop|restart|reload)
-		"$1";;
-	*)
-		echo "Usage: $0 {start|stop|restart|reload}"
-		exit 1
-esac
diff --git a/general/package/goke-osdrv-gk7205v200/goke-osdrv-gk7205v200.mk b/general/package/goke-osdrv-gk7205v200/goke-osdrv-gk7205v200.mk
index 0d944e05..950213db 100644
--- a/general/package/goke-osdrv-gk7205v200/goke-osdrv-gk7205v200.mk
+++ b/general/package/goke-osdrv-gk7205v200/goke-osdrv-gk7205v200.mk
@@ -25,9 +25,6 @@ define GOKE_OSDRV_GK7205V200_INSTALL_STAGING_CMDS
 endef
 
 define GOKE_OSDRV_GK7205V200_INSTALL_TARGET_CMDS
-	$(INSTALL) -m 755 -d $(TARGET_DIR)/etc/init.d
-	$(INSTALL) -m 755 -t $(TARGET_DIR)/etc/init.d $(BR2_EXTERNAL_GOKE_PATH)/package/goke-osdrv-gk7205v200/files/script/S95goke
-
 	$(INSTALL) -m 755 -d $(TARGET_DIR)/etc/sensors
 	$(INSTALL) -m 644 -t $(TARGET_DIR)/etc/sensors $(BR2_EXTERNAL_GOKE_PATH)/package/goke-osdrv-gk7205v200/files/sensor/config/*.ini
 
@@ -84,7 +81,7 @@ define GOKE_OSDRV_GK7205V200_INSTALL_TARGET_CMDS
 	### $(INSTALL) -m 644 -t $(TARGET_DIR)/lib/modules/$(LINUX_VERSION_PROBED)/goke $(BR2_EXTERNAL_GOKE_PATH)/package/goke-osdrv-gk7205v200/files/kmod/sysconfig.ko
 
 	$(INSTALL) -m 755 -d $(TARGET_DIR)/usr/bin
-	$(INSTALL) -m 755 -t $(TARGET_DIR)/usr/bin $(BR2_EXTERNAL_GOKE_PATH)/package/goke-osdrv-gk7205v200/files/script/load_*
+	$(INSTALL) -m 755 -t $(TARGET_DIR)/usr/bin $(BR2_EXTERNAL_GOKE_PATH)/package/goke-osdrv-gk7205v200/files/script/load*
 	$(INSTALL) -m 755 -t $(TARGET_DIR)/usr/bin $(BR2_EXTERNAL_GOKE_PATH)/package/goke-osdrv-gk7205v200/files/script/ircut_demo
 	$(INSTALL) -m 755 -t $(TARGET_DIR)/usr/bin $(BR2_EXTERNAL_GOKE_PATH)/package/goke-osdrv-gk7205v200/files/script/set_allocator
 
diff --git a/general/package/grainmedia-osdrv-gm8136/files/script/S95grainmedia b/general/package/grainmedia-osdrv-gm8136/files/script/S95grainmedia
deleted file mode 100755
index 697c38f6..00000000
--- a/general/package/grainmedia-osdrv-gm8136/files/script/S95grainmedia
+++ /dev/null
@@ -1,80 +0,0 @@
-#!/bin/sh
-
-DAEMON="majestic"
-PIDFILE="/var/run/$DAEMON.pid"
-
-DAEMON_ARGS="-s"
-
-# shellcheck source=/dev/null
-[ -r "/etc/default/$DAEMON" ] && . "/etc/default/$DAEMON"
-
-load_majestic() {
-	printf 'Starting %s: ' "$DAEMON"
-	[ -f /usr/bin/$DAEMON ] || echo -en "DISABLED, "
-	# shellcheck disable=SC2086 # we need the word splitting
-	[ -f /etc/coredump.conf ] && . /etc/coredump.conf
-	if [ "$coredump_enabled" ]; then
-		[ "$(yaml-cli -i /etc/majestic.yaml -g .watchdog.timeout)" -lt "30" ] && yaml-cli -i /etc/majestic.yaml -s .watchdog.timeout 30
-		ulimit -c unlimited && echo "|/usr/sbin/sendcoredump.sh" >/proc/sys/kernel/core_pattern
-	fi
-	start-stop-daemon -b -m -S -q -p "$PIDFILE" -x "/usr/bin/$DAEMON" \
-		-- $DAEMON_ARGS
-	status=$?
-	if [ "$status" -eq 0 ]; then
-		echo "OK"
-	else
-		echo "FAIL"
-	fi
-	return "$status"
-}
-
-# The daemon does not create a pidfile, and use "-m" to instruct start-stop-daemon to create one.
-start() {
-	logger -s -p daemon.info -t grainmedia "Check MAC for GrainMedia devices"
-	if [ "$(fw_printenv -n ethaddr)" = "00:00:23:34:45:66" ]; then
-		logger -s -p daemon.info -t grainmedia "The eth0 interface has a lousy MAC, let's try to change it.."
-		XMMAC="$(ipcinfo --xm-mac)" && [ -n "${XMMAC}" ] && fw_setenv ethaddr ${XMMAC} && reboot -f || logger -s -p daemon.info -t grainmedia "It is not possible to install a new MAC on the eth0 interface.."
-	else
-		logger -s -p daemon.info -t grainmedia "The eth0 interface has a correct MAC - $(fw_printenv -n ethaddr)"
-	fi
-	#
-	logger -s -p daemon.info -t grainmedia "Loading of kernel modules and initialization of the video system has started"
-	export TZ=$(cat /etc/TZ)
-	load_grainmedia
-	#
-	#
-	load_majestic
-}
-
-stop() {
-	printf 'Stopping %s: ' "$DAEMON"
-	[ -f /usr/bin/$DAEMON ] || echo -en "DISABLED, "
-	start-stop-daemon -K -q -p "$PIDFILE"
-	status=$?
-	if [ "$status" -eq 0 ]; then
-		rm -f "$PIDFILE"
-		echo "OK"
-	else
-		echo "FAIL"
-	fi
-	return "$status"
-}
-
-restart() {
-	stop
-	sleep 1
-	reload
-}
-
-reload() {
-	load_majestic
-}
-
-case "$1" in
-	start|stop|restart|reload)
-		"$1";;
-	*)
-		echo "Usage: $0 {start|stop|restart|reload}"
-		exit 1
-esac
-
diff --git a/general/package/grainmedia-osdrv-gm8136/grainmedia-osdrv-gm8136.mk b/general/package/grainmedia-osdrv-gm8136/grainmedia-osdrv-gm8136.mk
index 89976c1d..7e1db60d 100644
--- a/general/package/grainmedia-osdrv-gm8136/grainmedia-osdrv-gm8136.mk
+++ b/general/package/grainmedia-osdrv-gm8136/grainmedia-osdrv-gm8136.mk
@@ -10,9 +10,6 @@ GRAINMEDIA_OSDRV_GM8136_LICENSE = MIT
 GRAINMEDIA_OSDRV_GM8136_LICENSE_FILES = LICENSE
 
 define GRAINMEDIA_OSDRV_GM8136_INSTALL_TARGET_CMDS
-	$(INSTALL) -m 755 -d $(TARGET_DIR)/etc/init.d
-	$(INSTALL) -m 755 -t $(TARGET_DIR)/etc/init.d $(BR2_EXTERNAL_GRAINMEDIA_PATH)/package/grainmedia-osdrv-gm8136/files/script/S95grainmedia
-
 	$(INSTALL) -m 755 -d $(TARGET_DIR)/etc/sensors
 	$(INSTALL) -m 644 -t $(TARGET_DIR)/etc/sensors $(BR2_EXTERNAL_GRAINMEDIA_PATH)/package/grainmedia-osdrv-gm8136/files/sensor/config/*
 
diff --git a/general/package/hisilicon-osdrv-hi3516av100/files/script/S95hisilicon b/general/package/hisilicon-osdrv-hi3516av100/files/script/S95hisilicon
deleted file mode 100755
index 3a76fa69..00000000
--- a/general/package/hisilicon-osdrv-hi3516av100/files/script/S95hisilicon
+++ /dev/null
@@ -1,80 +0,0 @@
-#!/bin/sh
-
-DAEMON="majestic"
-PIDFILE="/var/run/$DAEMON.pid"
-
-DAEMON_ARGS="-s"
-
-# shellcheck source=/dev/null
-[ -r "/etc/default/$DAEMON" ] && . "/etc/default/$DAEMON"
-
-load_majestic() {
-	printf 'Starting %s: ' "$DAEMON"
-	[ -f /usr/bin/$DAEMON ] || echo -en "DISABLED, "
-	# shellcheck disable=SC2086 # we need the word splitting
-	[ -f /etc/coredump.conf ] && . /etc/coredump.conf
-	if [ "$coredump_enabled" ]; then
-		[ "$(yaml-cli -i /etc/majestic.yaml -g .watchdog.timeout)" -lt "30" ] && yaml-cli -i /etc/majestic.yaml -s .watchdog.timeout 30
-		ulimit -c unlimited && echo "|/usr/sbin/sendcoredump.sh" >/proc/sys/kernel/core_pattern
-	fi
-	start-stop-daemon -b -m -S -q -p "$PIDFILE" -x "/usr/bin/$DAEMON" \
-		-- $DAEMON_ARGS
-	status=$?
-	if [ "$status" -eq 0 ]; then
-		echo "OK"
-	else
-		echo "FAIL"
-	fi
-	return "$status"
-}
-
-# The daemon does not create a pidfile, and use "-m" to instruct start-stop-daemon to create one.
-start() {
-	logger -s -p daemon.info -t hisilicon "Check MAC for Xiongmai devices"
-	if [ "$(fw_printenv -n ethaddr)" = "00:00:23:34:45:66" ]; then
-		logger -s -p daemon.info -t hisilicon "The eth0 interface has a lousy MAC, let's try to change it.."
-		XMMAC="$(ipcinfo --xm-mac)" && [ -n "${XMMAC}" ] && fw_setenv ethaddr ${XMMAC} && reboot -f || logger -s -p daemon.info -t hisilicon "It is not possible to install a new MAC on the eth0 interface.."
-	else
-		logger -s -p daemon.info -t hisilicon "The eth0 interface has a correct MAC - $(fw_printenv -n ethaddr)"
-	fi
-	#
-	logger -s -p daemon.info -t hisilicon "Loading of kernel modules and initialization of the video system has started"
-	export TZ=$(cat /etc/TZ)
-	load_hisilicon -i
-	# sample_bindvivo_HISI_V2A 1
-	#
-	export SENSOR=$(fw_printenv -n sensor)
-	load_majestic
-}
-
-stop() {
-	printf 'Stopping %s: ' "$DAEMON"
-	[ -f /usr/bin/$DAEMON ] || echo -en "DISABLED, "
-	start-stop-daemon -K -q -p "$PIDFILE"
-	status=$?
-	if [ "$status" -eq 0 ]; then
-		rm -f "$PIDFILE"
-		echo "OK"
-	else
-		echo "FAIL"
-	fi
-	return "$status"
-}
-
-restart() {
-	stop
-	sleep 1
-	reload
-}
-
-reload() {
-	load_majestic
-}
-
-case "$1" in
-	start|stop|restart|reload)
-		"$1";;
-	*)
-		echo "Usage: $0 {start|stop|restart|reload}"
-		exit 1
-esac
diff --git a/general/package/hisilicon-osdrv-hi3516av100/hisilicon-osdrv-hi3516av100.mk b/general/package/hisilicon-osdrv-hi3516av100/hisilicon-osdrv-hi3516av100.mk
index 47359339..a4a6fe97 100644
--- a/general/package/hisilicon-osdrv-hi3516av100/hisilicon-osdrv-hi3516av100.mk
+++ b/general/package/hisilicon-osdrv-hi3516av100/hisilicon-osdrv-hi3516av100.mk
@@ -10,9 +10,6 @@ HISILICON_OSDRV_HI3516AV100_LICENSE = MIT
 HISILICON_OSDRV_HI3516AV100_LICENSE_FILES = LICENSE
 
 define HISILICON_OSDRV_HI3516AV100_INSTALL_TARGET_CMDS
-	$(INSTALL) -m 755 -d $(TARGET_DIR)/etc/init.d
-	$(INSTALL) -m 755 -t $(TARGET_DIR)/etc/init.d $(BR2_EXTERNAL_HISILICON_PATH)/package/hisilicon-osdrv-hi3516av100/files/script/S95hisilicon
-
 	$(INSTALL) -m 755 -d $(TARGET_DIR)/etc/sensors
 	$(INSTALL) -m 644 -t $(TARGET_DIR)/etc/sensors $(BR2_EXTERNAL_HISILICON_PATH)/package/hisilicon-osdrv-hi3516av100/files/sensor/config/*.ini
 
diff --git a/general/package/hisilicon-osdrv-hi3516cv100/files/script/S95hisilicon b/general/package/hisilicon-osdrv-hi3516cv100/files/script/S95hisilicon
deleted file mode 100755
index f3b4d652..00000000
--- a/general/package/hisilicon-osdrv-hi3516cv100/files/script/S95hisilicon
+++ /dev/null
@@ -1,79 +0,0 @@
-#!/bin/sh
-
-DAEMON="majestic"
-PIDFILE="/var/run/$DAEMON.pid"
-
-DAEMON_ARGS="-s"
-
-# shellcheck source=/dev/null
-[ -r "/etc/default/$DAEMON" ] && . "/etc/default/$DAEMON"
-
-load_majestic() {
-	printf 'Starting %s: ' "$DAEMON"
-	[ -f /usr/bin/$DAEMON ] || echo -en "DISABLED, "
-	# shellcheck disable=SC2086 # we need the word splitting
-	[ -f /etc/coredump.conf ] && . /etc/coredump.conf
-	if [ "$coredump_enabled" ]; then
-		[ "$(yaml-cli -i /etc/majestic.yaml -g .watchdog.timeout)" -lt "30" ] && yaml-cli -i /etc/majestic.yaml -s .watchdog.timeout 30
-		ulimit -c unlimited && echo "|/usr/sbin/sendcoredump.sh" >/proc/sys/kernel/core_pattern
-	fi
-	start-stop-daemon -b -m -S -q -p "$PIDFILE" -x "/usr/bin/$DAEMON" \
-		-- $DAEMON_ARGS
-	status=$?
-	if [ "$status" -eq 0 ]; then
-		echo "OK"
-	else
-		echo "FAIL"
-	fi
-	return "$status"
-}
-
-# The daemon does not create a pidfile, and use "-m" to instruct start-stop-daemon to create one.
-start() {
-	logger -s -p daemon.info -t hisilicon "Check MAC for Xiongmai devices"
-	if [ "$(fw_printenv -n ethaddr)" = "00:00:23:34:45:66" ]; then
-		logger -s -p daemon.info -t hisilicon "The eth0 interface has a lousy MAC, let's try to change it.."
-		XMMAC="$(ipcinfo --xm-mac)" && [ -n "${XMMAC}" ] && fw_setenv ethaddr ${XMMAC} && reboot -f || logger -s -p daemon.info -t hisilicon "It is not possible to install a new MAC on the eth0 interface.."
-	else
-		logger -s -p daemon.info -t hisilicon "The eth0 interface has a correct MAC - $(fw_printenv -n ethaddr)"
-	fi
-	#
-	logger -s -p daemon.info -t hisilicon "Loading of kernel modules and initialization of the video system has started"
-	export TZ=$(cat /etc/TZ)
-	load_hisilicon -i
-	#
-	export SENSOR=$(fw_printenv -n sensor)
-	load_majestic
-}
-
-stop() {
-	printf 'Stopping %s: ' "$DAEMON"
-	[ -f /usr/bin/$DAEMON ] || echo -en "DISABLED, "
-	start-stop-daemon -K -q -p "$PIDFILE"
-	status=$?
-	if [ "$status" -eq 0 ]; then
-		rm -f "$PIDFILE"
-		echo "OK"
-	else
-		echo "FAIL"
-	fi
-	return "$status"
-}
-
-restart() {
-	stop
-	sleep 1
-	reload
-}
-
-reload() {
-	load_majestic
-}
-
-case "$1" in
-	start|stop|restart|reload)
-		"$1";;
-	*)
-		echo "Usage: $0 {start|stop|restart|reload}"
-		exit 1
-esac
diff --git a/general/package/hisilicon-osdrv-hi3516cv100/hisilicon-osdrv-hi3516cv100.mk b/general/package/hisilicon-osdrv-hi3516cv100/hisilicon-osdrv-hi3516cv100.mk
index 51b638e5..06936b55 100644
--- a/general/package/hisilicon-osdrv-hi3516cv100/hisilicon-osdrv-hi3516cv100.mk
+++ b/general/package/hisilicon-osdrv-hi3516cv100/hisilicon-osdrv-hi3516cv100.mk
@@ -14,9 +14,6 @@ define HISILICON_OSDRV_HI3516CV100_BUILD_CMDS
 endef
 
 define HISILICON_OSDRV_HI3516CV100_INSTALL_TARGET_CMDS
-	$(INSTALL) -m 755 -d $(TARGET_DIR)/etc/init.d
-	$(INSTALL) -m 755 -t $(TARGET_DIR)/etc/init.d $(BR2_EXTERNAL_HISILICON_PATH)/package/hisilicon-osdrv-hi3516cv100/files/script/S95hisilicon
-
 	$(INSTALL) -m 755 -d $(TARGET_DIR)/etc/sensors
 	$(INSTALL) -m 644 -t $(TARGET_DIR)/etc/sensors $(BR2_EXTERNAL_HISILICON_PATH)/package/hisilicon-osdrv-hi3516cv100/files/sensor/config/*.ini
 
@@ -63,7 +60,7 @@ define HISILICON_OSDRV_HI3516CV100_INSTALL_TARGET_CMDS
 	$(INSTALL) -m 644 -t $(TARGET_DIR)/lib/modules/3.0.8/hisilicon $(BR2_EXTERNAL_HISILICON_PATH)/package/hisilicon-osdrv-hi3516cv100/files/kmod/wdt.ko
 
 	$(INSTALL) -m 755 -d $(TARGET_DIR)/usr/bin
-	$(INSTALL) -m 755 -t $(TARGET_DIR)/usr/bin $(BR2_EXTERNAL_HISILICON_PATH)/package/hisilicon-osdrv-hi3516cv100/files/script/load_hisilicon
+	$(INSTALL) -m 755 -t $(TARGET_DIR)/usr/bin $(BR2_EXTERNAL_HISILICON_PATH)/package/hisilicon-osdrv-hi3516cv100/files/script/load*
 	$(INSTALL) -m 755 -t $(TARGET_DIR)/usr/bin $(BR2_EXTERNAL_HISILICON_PATH)/package/hisilicon-osdrv-hi3516cv100/files/script/ircut_demo
 
 	$(INSTALL) -m 755 -d $(TARGET_DIR)/usr/lib/sensors
diff --git a/general/package/hisilicon-osdrv-hi3516cv200/files/script/S95hisilicon b/general/package/hisilicon-osdrv-hi3516cv200/files/script/S95hisilicon
deleted file mode 100755
index f3b4d652..00000000
--- a/general/package/hisilicon-osdrv-hi3516cv200/files/script/S95hisilicon
+++ /dev/null
@@ -1,79 +0,0 @@
-#!/bin/sh
-
-DAEMON="majestic"
-PIDFILE="/var/run/$DAEMON.pid"
-
-DAEMON_ARGS="-s"
-
-# shellcheck source=/dev/null
-[ -r "/etc/default/$DAEMON" ] && . "/etc/default/$DAEMON"
-
-load_majestic() {
-	printf 'Starting %s: ' "$DAEMON"
-	[ -f /usr/bin/$DAEMON ] || echo -en "DISABLED, "
-	# shellcheck disable=SC2086 # we need the word splitting
-	[ -f /etc/coredump.conf ] && . /etc/coredump.conf
-	if [ "$coredump_enabled" ]; then
-		[ "$(yaml-cli -i /etc/majestic.yaml -g .watchdog.timeout)" -lt "30" ] && yaml-cli -i /etc/majestic.yaml -s .watchdog.timeout 30
-		ulimit -c unlimited && echo "|/usr/sbin/sendcoredump.sh" >/proc/sys/kernel/core_pattern
-	fi
-	start-stop-daemon -b -m -S -q -p "$PIDFILE" -x "/usr/bin/$DAEMON" \
-		-- $DAEMON_ARGS
-	status=$?
-	if [ "$status" -eq 0 ]; then
-		echo "OK"
-	else
-		echo "FAIL"
-	fi
-	return "$status"
-}
-
-# The daemon does not create a pidfile, and use "-m" to instruct start-stop-daemon to create one.
-start() {
-	logger -s -p daemon.info -t hisilicon "Check MAC for Xiongmai devices"
-	if [ "$(fw_printenv -n ethaddr)" = "00:00:23:34:45:66" ]; then
-		logger -s -p daemon.info -t hisilicon "The eth0 interface has a lousy MAC, let's try to change it.."
-		XMMAC="$(ipcinfo --xm-mac)" && [ -n "${XMMAC}" ] && fw_setenv ethaddr ${XMMAC} && reboot -f || logger -s -p daemon.info -t hisilicon "It is not possible to install a new MAC on the eth0 interface.."
-	else
-		logger -s -p daemon.info -t hisilicon "The eth0 interface has a correct MAC - $(fw_printenv -n ethaddr)"
-	fi
-	#
-	logger -s -p daemon.info -t hisilicon "Loading of kernel modules and initialization of the video system has started"
-	export TZ=$(cat /etc/TZ)
-	load_hisilicon -i
-	#
-	export SENSOR=$(fw_printenv -n sensor)
-	load_majestic
-}
-
-stop() {
-	printf 'Stopping %s: ' "$DAEMON"
-	[ -f /usr/bin/$DAEMON ] || echo -en "DISABLED, "
-	start-stop-daemon -K -q -p "$PIDFILE"
-	status=$?
-	if [ "$status" -eq 0 ]; then
-		rm -f "$PIDFILE"
-		echo "OK"
-	else
-		echo "FAIL"
-	fi
-	return "$status"
-}
-
-restart() {
-	stop
-	sleep 1
-	reload
-}
-
-reload() {
-	load_majestic
-}
-
-case "$1" in
-	start|stop|restart|reload)
-		"$1";;
-	*)
-		echo "Usage: $0 {start|stop|restart|reload}"
-		exit 1
-esac
diff --git a/general/package/hisilicon-osdrv-hi3516cv200/hisilicon-osdrv-hi3516cv200.mk b/general/package/hisilicon-osdrv-hi3516cv200/hisilicon-osdrv-hi3516cv200.mk
index bde03ce7..c044d5bd 100644
--- a/general/package/hisilicon-osdrv-hi3516cv200/hisilicon-osdrv-hi3516cv200.mk
+++ b/general/package/hisilicon-osdrv-hi3516cv200/hisilicon-osdrv-hi3516cv200.mk
@@ -10,9 +10,6 @@ HISILICON_OSDRV_HI3516CV200_LICENSE = MIT
 HISILICON_OSDRV_HI3516CV200_LICENSE_FILES = LICENSE
 
 define HISILICON_OSDRV_HI3516CV200_INSTALL_TARGET_CMDS
-	$(INSTALL) -m 755 -d $(TARGET_DIR)/etc/init.d
-	$(INSTALL) -m 755 -t $(TARGET_DIR)/etc/init.d $(BR2_EXTERNAL_HISILICON_PATH)/package/hisilicon-osdrv-hi3516cv200/files/script/S95hisilicon
-
 	$(INSTALL) -m 755 -d $(TARGET_DIR)/etc/sensors
 	$(INSTALL) -m 644 -t $(TARGET_DIR)/etc/sensors $(BR2_EXTERNAL_HISILICON_PATH)/package/hisilicon-osdrv-hi3516cv200/files/sensor/config/*.ini
 
@@ -62,7 +59,7 @@ define HISILICON_OSDRV_HI3516CV200_INSTALL_TARGET_CMDS
 	# $(INSTALL) -m 644 -t $(TARGET_DIR)/lib/modules/4.9.37/hisilicon $(BR2_EXTERNAL_HISILICON_PATH)/package/hisilicon-osdrv-hi3516cv200/files/kmod/xxx.ko
 
 	$(INSTALL) -m 755 -d $(TARGET_DIR)/usr/bin
-	$(INSTALL) -m 755 -t $(TARGET_DIR)/usr/bin $(BR2_EXTERNAL_HISILICON_PATH)/package/hisilicon-osdrv-hi3516cv200/files/script/load_hisilicon
+	$(INSTALL) -m 755 -t $(TARGET_DIR)/usr/bin $(BR2_EXTERNAL_HISILICON_PATH)/package/hisilicon-osdrv-hi3516cv200/files/script/load*
 	$(INSTALL) -m 755 -t $(TARGET_DIR)/usr/bin $(BR2_EXTERNAL_HISILICON_PATH)/package/hisilicon-osdrv-hi3516cv200/files/script/ircut_demo
 
 	$(INSTALL) -m 755 -d $(TARGET_DIR)/usr/lib/sensors
diff --git a/general/package/hisilicon-osdrv-hi3516cv300/files/script/S95hisilicon b/general/package/hisilicon-osdrv-hi3516cv300/files/script/S95hisilicon
deleted file mode 100755
index f3b4d652..00000000
--- a/general/package/hisilicon-osdrv-hi3516cv300/files/script/S95hisilicon
+++ /dev/null
@@ -1,79 +0,0 @@
-#!/bin/sh
-
-DAEMON="majestic"
-PIDFILE="/var/run/$DAEMON.pid"
-
-DAEMON_ARGS="-s"
-
-# shellcheck source=/dev/null
-[ -r "/etc/default/$DAEMON" ] && . "/etc/default/$DAEMON"
-
-load_majestic() {
-	printf 'Starting %s: ' "$DAEMON"
-	[ -f /usr/bin/$DAEMON ] || echo -en "DISABLED, "
-	# shellcheck disable=SC2086 # we need the word splitting
-	[ -f /etc/coredump.conf ] && . /etc/coredump.conf
-	if [ "$coredump_enabled" ]; then
-		[ "$(yaml-cli -i /etc/majestic.yaml -g .watchdog.timeout)" -lt "30" ] && yaml-cli -i /etc/majestic.yaml -s .watchdog.timeout 30
-		ulimit -c unlimited && echo "|/usr/sbin/sendcoredump.sh" >/proc/sys/kernel/core_pattern
-	fi
-	start-stop-daemon -b -m -S -q -p "$PIDFILE" -x "/usr/bin/$DAEMON" \
-		-- $DAEMON_ARGS
-	status=$?
-	if [ "$status" -eq 0 ]; then
-		echo "OK"
-	else
-		echo "FAIL"
-	fi
-	return "$status"
-}
-
-# The daemon does not create a pidfile, and use "-m" to instruct start-stop-daemon to create one.
-start() {
-	logger -s -p daemon.info -t hisilicon "Check MAC for Xiongmai devices"
-	if [ "$(fw_printenv -n ethaddr)" = "00:00:23:34:45:66" ]; then
-		logger -s -p daemon.info -t hisilicon "The eth0 interface has a lousy MAC, let's try to change it.."
-		XMMAC="$(ipcinfo --xm-mac)" && [ -n "${XMMAC}" ] && fw_setenv ethaddr ${XMMAC} && reboot -f || logger -s -p daemon.info -t hisilicon "It is not possible to install a new MAC on the eth0 interface.."
-	else
-		logger -s -p daemon.info -t hisilicon "The eth0 interface has a correct MAC - $(fw_printenv -n ethaddr)"
-	fi
-	#
-	logger -s -p daemon.info -t hisilicon "Loading of kernel modules and initialization of the video system has started"
-	export TZ=$(cat /etc/TZ)
-	load_hisilicon -i
-	#
-	export SENSOR=$(fw_printenv -n sensor)
-	load_majestic
-}
-
-stop() {
-	printf 'Stopping %s: ' "$DAEMON"
-	[ -f /usr/bin/$DAEMON ] || echo -en "DISABLED, "
-	start-stop-daemon -K -q -p "$PIDFILE"
-	status=$?
-	if [ "$status" -eq 0 ]; then
-		rm -f "$PIDFILE"
-		echo "OK"
-	else
-		echo "FAIL"
-	fi
-	return "$status"
-}
-
-restart() {
-	stop
-	sleep 1
-	reload
-}
-
-reload() {
-	load_majestic
-}
-
-case "$1" in
-	start|stop|restart|reload)
-		"$1";;
-	*)
-		echo "Usage: $0 {start|stop|restart|reload}"
-		exit 1
-esac
diff --git a/general/package/hisilicon-osdrv-hi3516cv300/hisilicon-osdrv-hi3516cv300.mk b/general/package/hisilicon-osdrv-hi3516cv300/hisilicon-osdrv-hi3516cv300.mk
index 090fe8ef..f6d0c0ee 100644
--- a/general/package/hisilicon-osdrv-hi3516cv300/hisilicon-osdrv-hi3516cv300.mk
+++ b/general/package/hisilicon-osdrv-hi3516cv300/hisilicon-osdrv-hi3516cv300.mk
@@ -10,9 +10,6 @@ HISILICON_OSDRV_HI3516CV300_LICENSE = MIT
 HISILICON_OSDRV_HI3516CV300_LICENSE_FILES = LICENSE
 
 define HISILICON_OSDRV_HI3516CV300_INSTALL_TARGET_CMDS
-	$(INSTALL) -m 755 -d $(TARGET_DIR)/etc/init.d
-	$(INSTALL) -m 755 -t $(TARGET_DIR)/etc/init.d $(BR2_EXTERNAL_HISILICON_PATH)/package/hisilicon-osdrv-hi3516cv300/files/script/S95hisilicon
-
 	$(INSTALL) -m 755 -d $(TARGET_DIR)/etc/sensors
 	$(INSTALL) -m 644 -t $(TARGET_DIR)/etc/sensors $(BR2_EXTERNAL_HISILICON_PATH)/package/hisilicon-osdrv-hi3516cv300/files/sensor/config/*.ini
 
@@ -61,7 +58,7 @@ define HISILICON_OSDRV_HI3516CV300_INSTALL_TARGET_CMDS
 	$(INSTALL) -m 644 -t $(TARGET_DIR)/lib/modules/3.18.20/hisilicon $(BR2_EXTERNAL_HISILICON_PATH)/package/hisilicon-osdrv-hi3516cv300/files/kmod/virtualhifb.ko
 
 	$(INSTALL) -m 755 -d $(TARGET_DIR)/usr/bin
-	$(INSTALL) -m 755 -t $(TARGET_DIR)/usr/bin $(BR2_EXTERNAL_HISILICON_PATH)/package/hisilicon-osdrv-hi3516cv300/files/script/load_hisilicon
+	$(INSTALL) -m 755 -t $(TARGET_DIR)/usr/bin $(BR2_EXTERNAL_HISILICON_PATH)/package/hisilicon-osdrv-hi3516cv300/files/script/load*
 	$(INSTALL) -m 755 -t $(TARGET_DIR)/usr/bin $(BR2_EXTERNAL_HISILICON_PATH)/package/hisilicon-osdrv-hi3516cv300/files/script/ircut_demo
 
 	$(INSTALL) -m 755 -d $(TARGET_DIR)/usr/lib/sensors
diff --git a/general/package/hisilicon-osdrv-hi3516cv500/files/script/S95hisilicon b/general/package/hisilicon-osdrv-hi3516cv500/files/script/S95hisilicon
deleted file mode 100755
index 3928a15b..00000000
--- a/general/package/hisilicon-osdrv-hi3516cv500/files/script/S95hisilicon
+++ /dev/null
@@ -1,80 +0,0 @@
-#!/bin/sh
-
-DAEMON="majestic"
-PIDFILE="/var/run/$DAEMON.pid"
-
-DAEMON_ARGS="-s"
-
-# shellcheck source=/dev/null
-[ -r "/etc/default/$DAEMON" ] && . "/etc/default/$DAEMON"
-
-load_majestic() {
-	printf 'Starting %s: ' "$DAEMON"
-	[ -f /usr/bin/$DAEMON ] || echo -en "DISABLED, "
-	# shellcheck disable=SC2086 # we need the word splitting
-	[ -f /etc/coredump.conf ] && . /etc/coredump.conf
-	if [ "$coredump_enabled" ]; then
-		[ "$(yaml-cli -i /etc/majestic.yaml -g .watchdog.timeout)" -lt "30" ] && yaml-cli -i /etc/majestic.yaml -s .watchdog.timeout 30
-		ulimit -c unlimited && echo "|/usr/sbin/sendcoredump.sh" >/proc/sys/kernel/core_pattern
-	fi
-	start-stop-daemon -b -m -S -q -p "$PIDFILE" -x "/usr/bin/$DAEMON" \
-		-- $DAEMON_ARGS
-	status=$?
-	if [ "$status" -eq 0 ]; then
-		echo "OK"
-	else
-		echo "FAIL"
-	fi
-	return "$status"
-}
-
-# The daemon does not create a pidfile, and use "-m" to instruct start-stop-daemon to create one.
-start() {
-	logger -s -p daemon.info -t hisilicon "Check MAC for Xiongmai devices"
-	if [ "$(fw_printenv -n ethaddr)" = "00:00:23:34:45:66" ]; then
-		logger -s -p daemon.info -t hisilicon "The eth0 interface has a lousy MAC, let's try to change it.."
-		XMMAC="$(ipcinfo --xm-mac)" && [ -n "${XMMAC}" ] && fw_setenv ethaddr ${XMMAC} && reboot -f || logger -s -p daemon.info -t hisilicon "It is not possible to install a new MAC on the eth0 interface.."
-	else
-		logger -s -p daemon.info -t hisilicon "The eth0 interface has a correct MAC - $(fw_printenv -n ethaddr)"
-	fi
-	#
-	logger -s -p daemon.info -t hisilicon "Loading of kernel modules and initialization of the video system has started"
-	export TZ=$(cat /etc/TZ)
-	load_hisilicon -i
-	# sample_bindvivo_HISI_V4A 1
-	#
-	export SENSOR=$(fw_printenv -n sensor)
-	load_majestic
-}
-
-stop() {
-	printf 'Stopping %s: ' "$DAEMON"
-	[ -f /usr/bin/$DAEMON ] || echo -en "DISABLED, "
-	start-stop-daemon -K -q -p "$PIDFILE"
-	status=$?
-	if [ "$status" -eq 0 ]; then
-		rm -f "$PIDFILE"
-		echo "OK"
-	else
-		echo "FAIL"
-	fi
-	return "$status"
-}
-
-restart() {
-	stop
-	sleep 1
-	reload
-}
-
-reload() {
-	load_majestic
-}
-
-case "$1" in
-	start|stop|restart|reload)
-		"$1";;
-	*)
-		echo "Usage: $0 {start|stop|restart|reload}"
-		exit 1
-esac
diff --git a/general/package/hisilicon-osdrv-hi3516cv500/hisilicon-osdrv-hi3516cv500.mk b/general/package/hisilicon-osdrv-hi3516cv500/hisilicon-osdrv-hi3516cv500.mk
index 34175e60..b9e237e2 100644
--- a/general/package/hisilicon-osdrv-hi3516cv500/hisilicon-osdrv-hi3516cv500.mk
+++ b/general/package/hisilicon-osdrv-hi3516cv500/hisilicon-osdrv-hi3516cv500.mk
@@ -10,9 +10,6 @@ HISILICON_OSDRV_HI3516CV500_LICENSE = MIT
 HISILICON_OSDRV_HI3516CV500_LICENSE_FILES = LICENSE
 
 define HISILICON_OSDRV_HI3516CV500_INSTALL_TARGET_CMDS
-	$(INSTALL) -m 755 -d $(TARGET_DIR)/etc/init.d
-	$(INSTALL) -m 755 -t $(TARGET_DIR)/etc/init.d $(BR2_EXTERNAL_HISILICON_PATH)/package/hisilicon-osdrv-hi3516cv500/files/script/S95hisilicon
-
 	$(INSTALL) -m 755 -d $(TARGET_DIR)/etc/sensors
 	$(INSTALL) -m 644 -t $(TARGET_DIR)/etc/sensors $(BR2_EXTERNAL_HISILICON_PATH)/package/hisilicon-osdrv-hi3516cv500/files/sensor/config/*.ini
 
diff --git a/general/package/hisilicon-osdrv-hi3516ev200/files/script/S95hisilicon b/general/package/hisilicon-osdrv-hi3516ev200/files/script/S95hisilicon
deleted file mode 100755
index f3b4d652..00000000
--- a/general/package/hisilicon-osdrv-hi3516ev200/files/script/S95hisilicon
+++ /dev/null
@@ -1,79 +0,0 @@
-#!/bin/sh
-
-DAEMON="majestic"
-PIDFILE="/var/run/$DAEMON.pid"
-
-DAEMON_ARGS="-s"
-
-# shellcheck source=/dev/null
-[ -r "/etc/default/$DAEMON" ] && . "/etc/default/$DAEMON"
-
-load_majestic() {
-	printf 'Starting %s: ' "$DAEMON"
-	[ -f /usr/bin/$DAEMON ] || echo -en "DISABLED, "
-	# shellcheck disable=SC2086 # we need the word splitting
-	[ -f /etc/coredump.conf ] && . /etc/coredump.conf
-	if [ "$coredump_enabled" ]; then
-		[ "$(yaml-cli -i /etc/majestic.yaml -g .watchdog.timeout)" -lt "30" ] && yaml-cli -i /etc/majestic.yaml -s .watchdog.timeout 30
-		ulimit -c unlimited && echo "|/usr/sbin/sendcoredump.sh" >/proc/sys/kernel/core_pattern
-	fi
-	start-stop-daemon -b -m -S -q -p "$PIDFILE" -x "/usr/bin/$DAEMON" \
-		-- $DAEMON_ARGS
-	status=$?
-	if [ "$status" -eq 0 ]; then
-		echo "OK"
-	else
-		echo "FAIL"
-	fi
-	return "$status"
-}
-
-# The daemon does not create a pidfile, and use "-m" to instruct start-stop-daemon to create one.
-start() {
-	logger -s -p daemon.info -t hisilicon "Check MAC for Xiongmai devices"
-	if [ "$(fw_printenv -n ethaddr)" = "00:00:23:34:45:66" ]; then
-		logger -s -p daemon.info -t hisilicon "The eth0 interface has a lousy MAC, let's try to change it.."
-		XMMAC="$(ipcinfo --xm-mac)" && [ -n "${XMMAC}" ] && fw_setenv ethaddr ${XMMAC} && reboot -f || logger -s -p daemon.info -t hisilicon "It is not possible to install a new MAC on the eth0 interface.."
-	else
-		logger -s -p daemon.info -t hisilicon "The eth0 interface has a correct MAC - $(fw_printenv -n ethaddr)"
-	fi
-	#
-	logger -s -p daemon.info -t hisilicon "Loading of kernel modules and initialization of the video system has started"
-	export TZ=$(cat /etc/TZ)
-	load_hisilicon -i
-	#
-	export SENSOR=$(fw_printenv -n sensor)
-	load_majestic
-}
-
-stop() {
-	printf 'Stopping %s: ' "$DAEMON"
-	[ -f /usr/bin/$DAEMON ] || echo -en "DISABLED, "
-	start-stop-daemon -K -q -p "$PIDFILE"
-	status=$?
-	if [ "$status" -eq 0 ]; then
-		rm -f "$PIDFILE"
-		echo "OK"
-	else
-		echo "FAIL"
-	fi
-	return "$status"
-}
-
-restart() {
-	stop
-	sleep 1
-	reload
-}
-
-reload() {
-	load_majestic
-}
-
-case "$1" in
-	start|stop|restart|reload)
-		"$1";;
-	*)
-		echo "Usage: $0 {start|stop|restart|reload}"
-		exit 1
-esac
diff --git a/general/package/hisilicon-osdrv-hi3516ev200/hisilicon-osdrv-hi3516ev200.mk b/general/package/hisilicon-osdrv-hi3516ev200/hisilicon-osdrv-hi3516ev200.mk
index 050c17b1..1e3668eb 100644
--- a/general/package/hisilicon-osdrv-hi3516ev200/hisilicon-osdrv-hi3516ev200.mk
+++ b/general/package/hisilicon-osdrv-hi3516ev200/hisilicon-osdrv-hi3516ev200.mk
@@ -10,9 +10,6 @@ HISILICON_OSDRV_HI3516EV200_LICENSE = MIT
 HISILICON_OSDRV_HI3516EV200_LICENSE_FILES = LICENSE
 
 define HISILICON_OSDRV_HI3516EV200_INSTALL_TARGET_CMDS
-	$(INSTALL) -m 755 -d $(TARGET_DIR)/etc/init.d
-	$(INSTALL) -m 755 -t $(TARGET_DIR)/etc/init.d $(BR2_EXTERNAL_HISILICON_PATH)/package/hisilicon-osdrv-hi3516ev200/files/script/S95hisilicon
-
 	$(INSTALL) -m 755 -d $(TARGET_DIR)/etc/sensors
 	$(INSTALL) -m 644 -t $(TARGET_DIR)/etc/sensors $(BR2_EXTERNAL_HISILICON_PATH)/package/hisilicon-osdrv-hi3516ev200/files/sensor/config/*.ini
 
@@ -30,7 +27,7 @@ define HISILICON_OSDRV_HI3516EV200_INSTALL_TARGET_CMDS
 	$(INSTALL) -m 644 -t $(TARGET_DIR)/lib/modules/$(LINUX_VERSION_PROBED)/hisilicon $(BR2_EXTERNAL_HISILICON_PATH)/package/hisilicon-osdrv-hi3516ev200/files/kmod/hi3516ev200_isp.ko
 
 	$(INSTALL) -m 755 -d $(TARGET_DIR)/usr/bin
-	$(INSTALL) -m 755 -t $(TARGET_DIR)/usr/bin $(BR2_EXTERNAL_HISILICON_PATH)/package/hisilicon-osdrv-hi3516ev200/files/script/load_hisilicon
+	$(INSTALL) -m 755 -t $(TARGET_DIR)/usr/bin $(BR2_EXTERNAL_HISILICON_PATH)/package/hisilicon-osdrv-hi3516ev200/files/script/load*
 	$(INSTALL) -m 755 -t $(TARGET_DIR)/usr/bin $(BR2_EXTERNAL_HISILICON_PATH)/package/hisilicon-osdrv-hi3516ev200/files/script/ircut_demo
 	$(INSTALL) -m 755 -t $(TARGET_DIR)/usr/bin $(BR2_EXTERNAL_HISILICON_PATH)/package/hisilicon-osdrv-hi3516ev200/files/script/set_allocator
 
diff --git a/general/package/hisilicon-osdrv-hi3519v101/files/script/S95hisilicon b/general/package/hisilicon-osdrv-hi3519v101/files/script/S95hisilicon
deleted file mode 100755
index f3b4d652..00000000
--- a/general/package/hisilicon-osdrv-hi3519v101/files/script/S95hisilicon
+++ /dev/null
@@ -1,79 +0,0 @@
-#!/bin/sh
-
-DAEMON="majestic"
-PIDFILE="/var/run/$DAEMON.pid"
-
-DAEMON_ARGS="-s"
-
-# shellcheck source=/dev/null
-[ -r "/etc/default/$DAEMON" ] && . "/etc/default/$DAEMON"
-
-load_majestic() {
-	printf 'Starting %s: ' "$DAEMON"
-	[ -f /usr/bin/$DAEMON ] || echo -en "DISABLED, "
-	# shellcheck disable=SC2086 # we need the word splitting
-	[ -f /etc/coredump.conf ] && . /etc/coredump.conf
-	if [ "$coredump_enabled" ]; then
-		[ "$(yaml-cli -i /etc/majestic.yaml -g .watchdog.timeout)" -lt "30" ] && yaml-cli -i /etc/majestic.yaml -s .watchdog.timeout 30
-		ulimit -c unlimited && echo "|/usr/sbin/sendcoredump.sh" >/proc/sys/kernel/core_pattern
-	fi
-	start-stop-daemon -b -m -S -q -p "$PIDFILE" -x "/usr/bin/$DAEMON" \
-		-- $DAEMON_ARGS
-	status=$?
-	if [ "$status" -eq 0 ]; then
-		echo "OK"
-	else
-		echo "FAIL"
-	fi
-	return "$status"
-}
-
-# The daemon does not create a pidfile, and use "-m" to instruct start-stop-daemon to create one.
-start() {
-	logger -s -p daemon.info -t hisilicon "Check MAC for Xiongmai devices"
-	if [ "$(fw_printenv -n ethaddr)" = "00:00:23:34:45:66" ]; then
-		logger -s -p daemon.info -t hisilicon "The eth0 interface has a lousy MAC, let's try to change it.."
-		XMMAC="$(ipcinfo --xm-mac)" && [ -n "${XMMAC}" ] && fw_setenv ethaddr ${XMMAC} && reboot -f || logger -s -p daemon.info -t hisilicon "It is not possible to install a new MAC on the eth0 interface.."
-	else
-		logger -s -p daemon.info -t hisilicon "The eth0 interface has a correct MAC - $(fw_printenv -n ethaddr)"
-	fi
-	#
-	logger -s -p daemon.info -t hisilicon "Loading of kernel modules and initialization of the video system has started"
-	export TZ=$(cat /etc/TZ)
-	load_hisilicon -i
-	#
-	export SENSOR=$(fw_printenv -n sensor)
-	load_majestic
-}
-
-stop() {
-	printf 'Stopping %s: ' "$DAEMON"
-	[ -f /usr/bin/$DAEMON ] || echo -en "DISABLED, "
-	start-stop-daemon -K -q -p "$PIDFILE"
-	status=$?
-	if [ "$status" -eq 0 ]; then
-		rm -f "$PIDFILE"
-		echo "OK"
-	else
-		echo "FAIL"
-	fi
-	return "$status"
-}
-
-restart() {
-	stop
-	sleep 1
-	reload
-}
-
-reload() {
-	load_majestic
-}
-
-case "$1" in
-	start|stop|restart|reload)
-		"$1";;
-	*)
-		echo "Usage: $0 {start|stop|restart|reload}"
-		exit 1
-esac
diff --git a/general/package/hisilicon-osdrv-hi3519v101/hisilicon-osdrv-hi3519v101.mk b/general/package/hisilicon-osdrv-hi3519v101/hisilicon-osdrv-hi3519v101.mk
index 985c236e..14ac8450 100644
--- a/general/package/hisilicon-osdrv-hi3519v101/hisilicon-osdrv-hi3519v101.mk
+++ b/general/package/hisilicon-osdrv-hi3519v101/hisilicon-osdrv-hi3519v101.mk
@@ -10,9 +10,6 @@ HISILICON_OSDRV_HI3519V101_LICENSE = MIT
 HISILICON_OSDRV_HI3519V101_LICENSE_FILES = LICENSE
 
 define HISILICON_OSDRV_HI3519V101_INSTALL_TARGET_CMDS
-	$(INSTALL) -m 755 -d $(TARGET_DIR)/etc/init.d
-	$(INSTALL) -m 755 -t $(TARGET_DIR)/etc/init.d $(BR2_EXTERNAL_HISILICON_PATH)/package/hisilicon-osdrv-hi3519v101/files/script/S95hisilicon
-
 	$(INSTALL) -m 755 -d $(TARGET_DIR)/etc/sensors
 	$(INSTALL) -m 644 -t $(TARGET_DIR)/etc/sensors $(BR2_EXTERNAL_HISILICON_PATH)/package/hisilicon-osdrv-hi3519v101/files/sensor/config/*.ini
 
@@ -60,7 +57,7 @@ define HISILICON_OSDRV_HI3519V101_INSTALL_TARGET_CMDS
 	# $(INSTALL) -m 644 -t $(TARGET_DIR)/lib/modules/3.18.20/hisilicon $(BR2_EXTERNAL_HISILICON_PATH)/package/hisilicon-osdrv-hi3519v101/files/kmod/hi_user.ko
 
 	$(INSTALL) -m 755 -d $(TARGET_DIR)/usr/bin
-	$(INSTALL) -m 755 -t $(TARGET_DIR)/usr/bin $(BR2_EXTERNAL_HISILICON_PATH)/package/hisilicon-osdrv-hi3519v101/files/script/load_hisilicon
+	$(INSTALL) -m 755 -t $(TARGET_DIR)/usr/bin $(BR2_EXTERNAL_HISILICON_PATH)/package/hisilicon-osdrv-hi3519v101/files/script/load*
 	$(INSTALL) -m 755 -t $(TARGET_DIR)/usr/bin $(BR2_EXTERNAL_HISILICON_PATH)/package/hisilicon-osdrv-hi3519v101/files/script/ircut_demo
 
 	$(INSTALL) -m 755 -d $(TARGET_DIR)/usr/lib/sensors
diff --git a/general/package/hisilicon-osdrv-hi3536dv100/files/lib/libhdmi.so b/general/package/hisilicon-osdrv-hi3536dv100/files/lib/libhdmi.so
old mode 100755
new mode 100644
diff --git a/general/package/hisilicon-osdrv-hi3536dv100/files/lib/libjpeg6b.so b/general/package/hisilicon-osdrv-hi3536dv100/files/lib/libjpeg6b.so
old mode 100755
new mode 100644
diff --git a/general/package/hisilicon-osdrv-hi3536dv100/files/lib/libmpi.so b/general/package/hisilicon-osdrv-hi3536dv100/files/lib/libmpi.so
old mode 100755
new mode 100644
diff --git a/general/package/hisilicon-osdrv-hi3536dv100/files/lib/libtde.so b/general/package/hisilicon-osdrv-hi3536dv100/files/lib/libtde.so
old mode 100755
new mode 100644
diff --git a/general/package/hisilicon-osdrv-hi3536dv100/files/script/S95hisilicon b/general/package/hisilicon-osdrv-hi3536dv100/files/script/S95hisilicon
deleted file mode 100755
index 7432e974..00000000
--- a/general/package/hisilicon-osdrv-hi3536dv100/files/script/S95hisilicon
+++ /dev/null
@@ -1,23 +0,0 @@
-#!/bin/sh
-
-start() {
-	load_hisilicon -i
-}
-
-stop() {
-	load_hisilicon -r
-}
-
-restart() {
-	stop
-	sleep 1
-	reload
-}
-
-case "$1" in
-	start|stop)
-		"$1";;
-	*)
-		echo "Usage: $0 {start|stop}"
-		exit 1
-esac
diff --git a/general/package/hisilicon-osdrv-hi3536dv100/hisilicon-osdrv-hi3536dv100.mk b/general/package/hisilicon-osdrv-hi3536dv100/hisilicon-osdrv-hi3536dv100.mk
index e4e42e7b..6c293630 100644
--- a/general/package/hisilicon-osdrv-hi3536dv100/hisilicon-osdrv-hi3536dv100.mk
+++ b/general/package/hisilicon-osdrv-hi3536dv100/hisilicon-osdrv-hi3536dv100.mk
@@ -10,13 +10,9 @@ HISILICON_OSDRV_HI3536DV100_LICENSE = MIT
 HISILICON_OSDRV_HI3536DV100_LICENSE_FILES = LICENSE
 
 define HISILICON_OSDRV_HI3536DV100_INSTALL_TARGET_CMDS
-	# - Init script
-	$(INSTALL) -m 755 -d $(TARGET_DIR)/etc/init.d
-	$(INSTALL) -m 755 -t $(TARGET_DIR)/etc/init.d $(BR2_EXTERNAL_HISILICON_PATH)/package/hisilicon-osdrv-hi3536dv100/files/script/S95hisilicon
-
 	# - Loader
 	$(INSTALL) -m 755 -d $(TARGET_DIR)/usr/bin
-	$(INSTALL) -m 755 -t $(TARGET_DIR)/usr/bin $(BR2_EXTERNAL_HISILICON_PATH)/package/hisilicon-osdrv-hi3536dv100/files/script/load_hisilicon
+	$(INSTALL) -m 755 -t $(TARGET_DIR)/usr/bin $(BR2_EXTERNAL_HISILICON_PATH)/package/hisilicon-osdrv-hi3536dv100/files/script/load*
 
 	# - Kernel modules
 	$(INSTALL) -m 755 -d $(TARGET_DIR)/lib/modules/4.9.37/hisilicon
@@ -68,7 +64,6 @@ define HISILICON_OSDRV_HI3536DV100_INSTALL_TARGET_CMDS
 	$(INSTALL) -m 644 -t $(TARGET_DIR)/usr/lib/ $(BR2_EXTERNAL_HISILICON_PATH)/package/hisilicon-osdrv-hi3536dv100/files/lib/libVoiceEngine.so
 	$(INSTALL) -m 644 -t $(TARGET_DIR)/usr/lib/ $(BR2_EXTERNAL_HISILICON_PATH)/package/hisilicon-osdrv-hi3536dv100/files/lib/libhive_HPF.so
 	$(INSTALL) -m 644 -t $(TARGET_DIR)/usr/lib/ $(BR2_EXTERNAL_HISILICON_PATH)/package/hisilicon-osdrv-hi3536dv100/files/lib/libaacdec.so
-
 endef
 
 $(eval $(generic-package))
diff --git a/general/package/ingenic-osdrv-t20/files/script/S95ingenic b/general/package/ingenic-osdrv-t20/files/script/S95ingenic
deleted file mode 100755
index 14d9d1e1..00000000
--- a/general/package/ingenic-osdrv-t20/files/script/S95ingenic
+++ /dev/null
@@ -1,82 +0,0 @@
-#!/bin/sh
-
-DAEMON="majestic"
-PIDFILE="/var/run/$DAEMON.pid"
-
-DAEMON_ARGS="-s"
-
-# shellcheck source=/dev/null
-[ -r "/etc/default/$DAEMON" ] && . "/etc/default/$DAEMON"
-
-load_majestic() {
-	printf 'Starting %s: ' "$DAEMON"
-	[ -f /usr/bin/$DAEMON ] || echo -en "DISABLED, "
-	# shellcheck disable=SC2086 # we need the word splitting
-	[ -f /etc/coredump.conf ] && . /etc/coredump.conf
-	if [ "$coredump_enabled" ]; then
-		[ "$(yaml-cli -i /etc/majestic.yaml -g .watchdog.timeout)" -lt "30" ] && yaml-cli -i /etc/majestic.yaml -s .watchdog.timeout 30
-		ulimit -c unlimited && echo "|/usr/sbin/sendcoredump.sh" >/proc/sys/kernel/core_pattern
-	fi
-	start-stop-daemon -b -m -S -q -p "$PIDFILE" -x "/usr/bin/$DAEMON" \
-		-- $DAEMON_ARGS
-	status=$?
-	if [ "$status" -eq 0 ]; then
-		echo "OK"
-	else
-		echo "FAIL"
-	fi
-	return "$status"
-}
-
-# The daemon does not create a pidfile, and use "-m" to instruct start-stop-daemon to create one.
-start() {
-	logger -s -p daemon.info -t ingenic "Check MAC for Ingenic devices"
-	if [ "$(fw_printenv -n ethaddr)" = "00:00:23:34:45:66" ]; then
-		logger -s -p daemon.info -t ingenic "The eth0 interface has a lousy MAC, please change it.."
-	else
-		logger -s -p daemon.info -t ingenic "The eth0 interface has a correct MAC - $(fw_printenv -n ethaddr)"
-	fi
-	#
-	logger -s -p daemon.info -t ingenic "Loading of kernel modules and initialization of the video system has started"
-	export TZ=$(cat /etc/TZ)
-	load_ingenic
-	#
-	#
-	# export SENSOR=$(fw_printenv -n sensor)
-	export SENSOR=$(cat /proc/jz/sinfo/info | sed -e 's/.*://')
-	load_majestic
-}
-
-stop() {
-	printf 'Stopping %s: ' "$DAEMON"
-	[ -f /usr/bin/$DAEMON ] || echo -en "DISABLED, "
-	start-stop-daemon -K -q -p "$PIDFILE"
-	status=$?
-	if [ "$status" -eq 0 ]; then
-		rm -f "$PIDFILE"
-		echo "OK"
-	else
-		echo "FAIL"
-	fi
-	return "$status"
-}
-
-restart() {
-	stop
-	sleep 1
-	reload
-}
-
-reload() {
-	load_majestic
-}
-
-case "$1" in
-start | stop | restart | reload)
-	"$1"
-	;;
-*)
-	echo "Usage: $0 {start|stop|restart|reload}"
-	exit 1
-	;;
-esac
diff --git a/general/package/ingenic-osdrv-t20/files/script/load_ingenic b/general/package/ingenic-osdrv-t20/files/script/load_ingenic
index 9e1ad815..df34cad1 100755
--- a/general/package/ingenic-osdrv-t20/files/script/load_ingenic
+++ b/general/package/ingenic-osdrv-t20/files/script/load_ingenic
@@ -1,10 +1,20 @@
 #!/bin/sh
 
-KMOD_PATH=/lib/modules/3.10.14/ingenic
+KMOD_PATH=/lib/modules/$(uname -r)/ingenic
+vendor=$(ipcinfo -v)
+
+if [ ! -f /usr/sbin/sensor_cli ]; then
+    ln -s /usr/sbin/extutils /usr/sbin/sensor_cli
+fi
+
 SOC=$(ipcinfo --chip-name || fw_printenv -n soc)
 
 echo 1 >/proc/sys/vm/overcommit_memory
 
+log_vendor() {
+  logger -s -p daemon.info -t ${vendor} "$1"
+}
+
 check_return() {
     if [ $? -ne 0 ]; then
         echo err: $1
@@ -18,18 +28,23 @@ if [ $? -ne 0 ]; then
     insmod ${KMOD_PATH/%\//}/sinfo.ko
     check_return "insmod sinfo"
 fi
-echo 1 >/proc/jz/sinfo/info
-check_return "start sinfo"
 
 if fw_printenv -n sensor >/dev/null; then
     export SENSOR=$(fw_printenv -n sensor)
-    logger -s -p daemon.info -t ingenic "Get data from environment and set SENSOR as ${SENSOR}"
+    log_vendor "Get data from environment and set SENSOR as ${SENSOR}"
 else
-    SENSOR_INFO=$(cat /proc/jz/sinfo/info)
-    check_return "get sensor type"
-    SENSOR=${SENSOR_INFO#*:}
-    logger -s -p daemon.info -t ingenic "Get data from sinfo and set SENSOR as ${SENSOR}"
-    fw_setenv sensor $SENSOR && logger -s -p daemon.info -t ingenic "Write detected ${SENSOR} to U-Boot ENV"
+	echo 1 >/proc/jz/sinfo/info
+	check_return "start sinfo"
+	SENSOR_INFO=$(cat /proc/jz/sinfo/info)
+	check_return "get sensor type"
+	SENSOR=${SENSOR_INFO#*:}
+    if [ "sensor not found" = "$SENSOR" ]; then
+        unset SENSOR
+        fw_setenv sensor
+    else
+        log_vendor "Get data from sinfo and set SENSOR as ${SENSOR}"
+        fw_setenv sensor $SENSOR && log_vendor "Write detected ${SENSOR} to U-Boot ENV"
+    fi
 fi
 
 case ${SENSOR} in
diff --git a/general/package/ingenic-osdrv-t20/ingenic-osdrv-t20.mk b/general/package/ingenic-osdrv-t20/ingenic-osdrv-t20.mk
index 279e4b90..083a707b 100644
--- a/general/package/ingenic-osdrv-t20/ingenic-osdrv-t20.mk
+++ b/general/package/ingenic-osdrv-t20/ingenic-osdrv-t20.mk
@@ -10,9 +10,6 @@ INGENIC_OSDRV_T20_LICENSE = MIT
 INGENIC_OSDRV_T20_LICENSE_FILES = LICENSE
 
 define INGENIC_OSDRV_T20_INSTALL_TARGET_CMDS
-	$(INSTALL) -m 755 -d $(TARGET_DIR)/etc/init.d
-	$(INSTALL) -m 755 -t $(TARGET_DIR)/etc/init.d $(BR2_EXTERNAL_INGENIC_PATH)/package/ingenic-osdrv-t20/files/script/S95ingenic
-
 	$(INSTALL) -m 755 -d $(TARGET_DIR)/etc/sensor
 	$(INSTALL) -m 644 -t $(TARGET_DIR)/etc/sensor $(BR2_EXTERNAL_INGENIC_PATH)/package/ingenic-osdrv-t20/files/sensor/*.yaml
 	# $(INSTALL) -m 644 -t $(TARGET_DIR)/etc/sensor $(BR2_EXTERNAL_INGENIC_PATH)/package/ingenic-osdrv-t20/files/sensor/params/*.bin
diff --git a/general/package/ingenic-osdrv-t21/files/script/S95ingenic b/general/package/ingenic-osdrv-t21/files/script/S95ingenic
deleted file mode 100755
index 887774a4..00000000
--- a/general/package/ingenic-osdrv-t21/files/script/S95ingenic
+++ /dev/null
@@ -1,81 +0,0 @@
-#!/bin/sh
-
-DAEMON="majestic"
-PIDFILE="/var/run/$DAEMON.pid"
-
-DAEMON_ARGS="-s"
-
-# shellcheck source=/dev/null
-[ -r "/etc/default/$DAEMON" ] && . "/etc/default/$DAEMON"
-
-load_majestic() {
-	printf 'Starting %s: ' "$DAEMON"
-	[ -f /usr/bin/$DAEMON ] || echo -en "DISABLED, "
-	# shellcheck disable=SC2086 # we need the word splitting
-	[ -f /etc/coredump.conf ] && . /etc/coredump.conf
-	if [ "$coredump_enabled" ]; then
-		[ "$(yaml-cli -i /etc/majestic.yaml -g .watchdog.timeout)" -lt "30" ] && yaml-cli -i /etc/majestic.yaml -s .watchdog.timeout 30
-		ulimit -c unlimited && echo "|/usr/sbin/sendcoredump.sh" >/proc/sys/kernel/core_pattern
-	fi
-	start-stop-daemon -b -m -S -q -p "$PIDFILE" -x "/usr/bin/$DAEMON" \
-		-- $DAEMON_ARGS
-	status=$?
-	if [ "$status" -eq 0 ]; then
-		echo "OK"
-	else
-		echo "FAIL"
-	fi
-	return "$status"
-}
-
-# The daemon does not create a pidfile, and use "-m" to instruct start-stop-daemon to create one.
-start() {
-	logger -s -p daemon.info -t ingenic "Check MAC for Ingenic devices"
-	if [ "$(fw_printenv -n ethaddr)" = "00:00:23:34:45:66" ]; then
-		logger -s -p daemon.info -t ingenic "The eth0 interface has a lousy MAC, please change it.."
-	else
-		logger -s -p daemon.info -t ingenic "The eth0 interface has a correct MAC - $(fw_printenv -n ethaddr)"
-	fi
-	#
-	logger -s -p daemon.info -t ingenic "Loading of kernel modules and initialization of the video system has started"
-	export TZ=$(cat /etc/TZ)
-	load_ingenic
-	#
-	#
-	# export SENSOR=$(fw_printenv -n sensor)
-	export SENSOR=$(cat /proc/jz/sinfo/info | sed -e 's/.*://')
-	load_majestic
-}
-
-stop() {
-	printf 'Stopping %s: ' "$DAEMON"
-	[ -f /usr/bin/$DAEMON ] || echo -en "DISABLED, "
-	start-stop-daemon -K -q -p "$PIDFILE"
-	status=$?
-	if [ "$status" -eq 0 ]; then
-		rm -f "$PIDFILE"
-		echo "OK"
-	else
-		echo "FAIL"
-	fi
-	return "$status"
-}
-
-restart() {
-	stop
-	sleep 1
-	reload
-}
-
-reload() {
-	load_majestic
-}
-
-case "$1" in
-	start|stop|restart|reload)
-		"$1";;
-	*)
-		echo "Usage: $0 {start|stop|restart|reload}"
-		exit 1
-esac
-
diff --git a/general/package/ingenic-osdrv-t21/files/script/load_ingenic b/general/package/ingenic-osdrv-t21/files/script/load_ingenic
index e9b3f876..aa4a6314 100755
--- a/general/package/ingenic-osdrv-t21/files/script/load_ingenic
+++ b/general/package/ingenic-osdrv-t21/files/script/load_ingenic
@@ -1,10 +1,20 @@
 #!/bin/sh
 
-KMOD_PATH=/lib/modules/3.10.14__isvp_turkey_1.0__/ingenic
+KMOD_PATH=/lib/modules/$(uname -r)/ingenic
+vendor=$(ipcinfo -v)
+
+if [ ! -f /usr/sbin/sensor_cli ]; then
+    ln -s /usr/sbin/extutils /usr/sbin/sensor_cli
+fi
+
 SOC=$(ipcinfo --chip-name || fw_printenv -n soc)
 
 echo 1 >/proc/sys/vm/overcommit_memory
 
+log_vendor() {
+  logger -s -p daemon.info -t ${vendor} "$1"
+}
+
 check_return() {
     if [ $? -ne 0 ]; then
         echo err: $1
@@ -18,18 +28,23 @@ if [ $? -ne 0 ]; then
     insmod ${KMOD_PATH/%\//}/sinfo.ko
     check_return "insmod sinfo"
 fi
-echo 1 >/proc/jz/sinfo/info
-check_return "start sinfo"
 
 if fw_printenv -n sensor >/dev/null; then
     export SENSOR=$(fw_printenv -n sensor)
-    logger -s -p daemon.info -t ingenic "Get data from environment and set SENSOR as ${SENSOR}"
+    log_vendor "Get data from environment and set SENSOR as ${SENSOR}"
 else
+	echo 1 >/proc/jz/sinfo/info
+	check_return "start sinfo"
     SENSOR_INFO=$(cat /proc/jz/sinfo/info)
     check_return "get sensor type"
     SENSOR=${SENSOR_INFO#*:}
-    logger -s -p daemon.info -t ingenic "Get data from sinfo and set SENSOR as ${SENSOR}"
-    fw_setenv sensor $SENSOR && logger -s -p daemon.info -t ingenic "Write detected ${SENSOR} to U-Boot ENV"
+    if [ "sensor not found" = "$SENSOR" ]; then
+        unset SENSOR
+        fw_setenv sensor
+    else
+        log_vendor "Get data from sinfo and set SENSOR as ${SENSOR}"
+        fw_setenv sensor $SENSOR && log_vendor "Write detected ${SENSOR} to U-Boot ENV"
+    fi
 fi
 
 case ${SENSOR} in
@@ -84,14 +99,14 @@ if [ $? -ne 0 ]; then
     check_return "insmod isp drv"
 fi
 
-lsmod | grep "audio" >/dev/null
-if [ $? -ne 0 ]; then
-    insmod ${KMOD_PATH/%\//}/audio.ko
-    check_return "insmod audio"
-fi
-
 lsmod | grep ${SENSOR} >/dev/null
 if [ $? -ne 0 ]; then
     insmod ${KMOD_PATH/%\//}/sensor_${SENSOR}_${SOC}.ko ${SENSOR_PARAM}
     check_return "insmod sensor drv"
 fi
+
+lsmod | grep "audio" >/dev/null
+if [ $? -ne 0 ]; then
+    insmod ${KMOD_PATH/%\//}/audio.ko
+    check_return "insmod audio"
+fi
diff --git a/general/package/ingenic-osdrv-t21/ingenic-osdrv-t21.mk b/general/package/ingenic-osdrv-t21/ingenic-osdrv-t21.mk
index 940e58c7..5e2090ae 100644
--- a/general/package/ingenic-osdrv-t21/ingenic-osdrv-t21.mk
+++ b/general/package/ingenic-osdrv-t21/ingenic-osdrv-t21.mk
@@ -10,9 +10,6 @@ INGENIC_OSDRV_T21_LICENSE = MIT
 INGENIC_OSDRV_T21_LICENSE_FILES = LICENSE
 
 define INGENIC_OSDRV_T21_INSTALL_TARGET_CMDS
-	$(INSTALL) -m 755 -d $(TARGET_DIR)/etc/init.d
-	$(INSTALL) -m 755 -t $(TARGET_DIR)/etc/init.d $(BR2_EXTERNAL_INGENIC_PATH)/package/ingenic-osdrv-t21/files/script/S95ingenic
-
 	$(INSTALL) -m 755 -d $(TARGET_DIR)/etc/sensor
 	$(INSTALL) -m 644 -t $(TARGET_DIR)/etc/sensor $(BR2_EXTERNAL_INGENIC_PATH)/package/ingenic-osdrv-t21/files/sensor/*.yaml
 	# $(INSTALL) -m 644 -t $(TARGET_DIR)/etc/sensor $(BR2_EXTERNAL_INGENIC_PATH)/package/ingenic-osdrv-t21/files/sensor/params/*.bin
@@ -53,7 +50,6 @@ define INGENIC_OSDRV_T21_INSTALL_TARGET_CMDS
 	$(INSTALL) -m 755 -d $(TARGET_DIR)/usr/bin
 	$(INSTALL) -m 755 -t $(TARGET_DIR)/usr/bin $(BR2_EXTERNAL_INGENIC_PATH)/package/ingenic-osdrv-t21/files/script/load*
 	# $(INSTALL) -m 755 -t $(TARGET_DIR)/usr/bin $(BR2_EXTERNAL_INGENIC_PATH)/package/ingenic-osdrv-t21/files/script/ircut_demo
-	# $(INSTALL) -m 755 -t $(TARGET_DIR)/usr/bin $(BR2_EXTERNAL_INGENIC_PATH)/package/ingenic-osdrv-t21/files/sample/*
 
 	# $(INSTALL) -m 755 -d $(TARGET_DIR)/usr/lib/sensors/params
 	# $(INSTALL) -m 644 -t $(TARGET_DIR)/usr/lib/sensors/params $(BR2_EXTERNAL_INGENIC_PATH)/package/ingenic-osdrv-t21/files/sensor/params/*.bin
diff --git a/general/package/ingenic-osdrv-t30/files/script/S95ingenic b/general/package/ingenic-osdrv-t30/files/script/S95ingenic
deleted file mode 100755
index 005dc6bf..00000000
--- a/general/package/ingenic-osdrv-t30/files/script/S95ingenic
+++ /dev/null
@@ -1,86 +0,0 @@
-#!/bin/sh
-
-DAEMON="majestic"
-PIDFILE="/var/run/$DAEMON.pid"
-
-DAEMON_ARGS="-s"
-
-# shellcheck source=/dev/null
-[ -r "/etc/default/$DAEMON" ] && . "/etc/default/$DAEMON"
-
-load_majestic() {
-	printf 'Starting %s: ' "$DAEMON"
-	[ -f /usr/bin/$DAEMON ] || echo -en "DISABLED, "
-	# shellcheck disable=SC2086 # we need the word splitting
-	[ -f /etc/coredump.conf ] && . /etc/coredump.conf
-	if [ "$coredump_enabled" ]; then
-		[ "$(yaml-cli -i /etc/majestic.yaml -g .watchdog.timeout)" -lt "30" ] && yaml-cli -i /etc/majestic.yaml -s .watchdog.timeout 30
-		ulimit -c unlimited && echo "|/usr/sbin/sendcoredump.sh" >/proc/sys/kernel/core_pattern
-	fi
-	start-stop-daemon -b -m -S -q -p "$PIDFILE" -x "/usr/bin/$DAEMON" \
-		-- $DAEMON_ARGS
-	status=$?
-	if [ "$status" -eq 0 ]; then
-		echo "OK"
-	else
-		echo "FAIL"
-	fi
-	return "$status"
-}
-
-# The daemon does not create a pidfile, and use "-m" to instruct start-stop-daemon to create one.
-start() {
-	logger -s -p daemon.info -t ingenic "Check MAC for Ingenic devices"
-	if [ "$(fw_printenv -n ethaddr)" = "00:00:23:34:45:66" ]; then
-		logger -s -p daemon.info -t ingenic "The eth0 interface has a lousy MAC, please change it.."
-	else
-		logger -s -p daemon.info -t ingenic "The eth0 interface has a correct MAC - $(fw_printenv -n ethaddr)"
-	fi
-	#
-	logger -s -p daemon.info -t ingenic "Loading of kernel modules and initialization of the video system has started"
-	export TZ=$(cat /etc/TZ)
-	load_ingenic
-	#
-	#
-	# export SENSOR=$(fw_printenv -n sensor)
-	export SENSOR=$(cat /proc/jz/sinfo/info | sed -e 's/.*://')
-	SENSOR=$(cat /proc/jz/sinfo/info | sed -e 's/.*://')
-	if [ "sensor not found" = "$SENSOR" ]; then
-		unset SENSOR
-	else
-		export SENSOR=$SENSOR
-	fi
-	load_majestic
-}
-
-stop() {
-	printf 'Stopping %s: ' "$DAEMON"
-	[ -f /usr/bin/$DAEMON ] || echo -en "DISABLED, "
-	start-stop-daemon -K -q -p "$PIDFILE"
-	status=$?
-	if [ "$status" -eq 0 ]; then
-		rm -f "$PIDFILE"
-		echo "OK"
-	else
-		echo "FAIL"
-	fi
-	return "$status"
-}
-
-restart() {
-	stop
-	sleep 1
-	reload
-}
-
-reload() {
-	load_majestic
-}
-
-case "$1" in
-	start|stop|restart|reload)
-		"$1";;
-	*)
-		echo "Usage: $0 {start|stop|restart|reload}"
-		exit 1
-esac
diff --git a/general/package/ingenic-osdrv-t30/files/script/load_ingenic b/general/package/ingenic-osdrv-t30/files/script/load_ingenic
index 20928039..3a3ffd15 100755
--- a/general/package/ingenic-osdrv-t30/files/script/load_ingenic
+++ b/general/package/ingenic-osdrv-t30/files/script/load_ingenic
@@ -1,9 +1,18 @@
 #!/bin/sh
 
-KMOD_PATH=/lib/modules/3.10.14__isvp_monkey_1.0__/ingenic
+KMOD_PATH=/lib/modules/$(uname -r)/ingenic
+vendor=$(ipcinfo -v)
+
+if [ ! -f /usr/sbin/sensor_cli ]; then
+    ln -s /usr/sbin/extutils /usr/sbin/sensor_cli
+fi
 
 echo 1 >/proc/sys/vm/overcommit_memory
 
+log_vendor() {
+  logger -s -p daemon.info -t ${vendor} "$1"
+}
+
 check_return() {
     if [ $? -ne 0 ]; then
         echo err: $1
@@ -17,13 +26,13 @@ if [ $? -ne 0 ]; then
     insmod ${KMOD_PATH/%\//}/sinfo.ko
     check_return "insmod sinfo"
 fi
-echo 1 >/proc/jz/sinfo/info
-check_return "start sinfo"
 
 if fw_printenv -n sensor >/dev/null; then
     export SENSOR=$(fw_printenv -n sensor)
-    logger -s -p daemon.info -t ingenic "Get data from environment and set SENSOR as ${SENSOR}"
+    log_vendor "Get data from environment and set SENSOR as ${SENSOR}"
 else
+	echo 1 >/proc/jz/sinfo/info
+	check_return "start sinfo"
     SENSOR_INFO=$(cat /proc/jz/sinfo/info)
     check_return "get sensor type"
     SENSOR=${SENSOR_INFO#*:}
@@ -31,8 +40,8 @@ else
         unset SENSOR
         fw_setenv sensor
     else
-        logger -s -p daemon.info -t ingenic "Get data from sinfo and set SENSOR as ${SENSOR}"
-        fw_setenv sensor $SENSOR && logger -s -p daemon.info -t ingenic "Write detected ${SENSOR} to U-Boot ENV"
+        log_vendor "Get data from sinfo and set SENSOR as ${SENSOR}"
+        fw_setenv sensor $SENSOR && log_vendor "Write detected ${SENSOR} to U-Boot ENV"
     fi
 fi
 
@@ -57,21 +66,20 @@ if [ $? -ne 0 ]; then
     check_return "insmod isp drv"
 fi
 
+lsmod | grep ${SENSOR} >/dev/null
+if [ $? -ne 0 ]; then
+    insmod ${KMOD_PATH/%\//}/sensor_${SENSOR}_t30.ko ${SENSOR_PARAM}
+    check_return "insmod sensor drv"
+fi
+
 lsmod | grep "audio" >/dev/null
 if [ $? -ne 0 ]; then
     insmod ${KMOD_PATH/%\//}/audio.ko
     check_return "insmod audio"
 fi
 
-lsmod | grep ${SENSOR} >/dev/null
-if [ $? -ne 0 ]; then
-    insmod ${KMOD_PATH/%\//}/sensor_${SENSOR}_t30.ko ${SENSOR_PARAM}
-    check_return "insmod sensor drv"
-fi
-#
-# Need for claim gpio 57,58 on HICHIP (CamHi/Xin) boards
+# Need for claim gpio
 insmod ${KMOD_PATH/%\//}/gpio.ko
 echo $(yaml-cli -i /etc/majestic.yaml -g .nightMode.irCutPin1) >/proc/jz/claim/gpio
 echo $(yaml-cli -i /etc/majestic.yaml -g .nightMode.irCutPin2) >/proc/jz/claim/gpio
 # echo $(yaml-cli -i /etc/majestic.yaml -g .nightMode.irSensorPin) >/proc/jz/claim/gpio
-#
diff --git a/general/package/ingenic-osdrv-t30/ingenic-osdrv-t30.mk b/general/package/ingenic-osdrv-t30/ingenic-osdrv-t30.mk
index d20c8536..bbdd6184 100644
--- a/general/package/ingenic-osdrv-t30/ingenic-osdrv-t30.mk
+++ b/general/package/ingenic-osdrv-t30/ingenic-osdrv-t30.mk
@@ -10,9 +10,6 @@ INGENIC_OSDRV_T30_LICENSE = MIT
 INGENIC_OSDRV_T30_LICENSE_FILES = LICENSE
 
 define INGENIC_OSDRV_T30_INSTALL_TARGET_CMDS
-	$(INSTALL) -m 755 -d $(TARGET_DIR)/etc/init.d
-	$(INSTALL) -m 755 -t $(TARGET_DIR)/etc/init.d $(BR2_EXTERNAL_INGENIC_PATH)/package/ingenic-osdrv-t30/files/script/S95ingenic
-
 	$(INSTALL) -m 755 -d $(TARGET_DIR)/etc/sensor
 	$(INSTALL) -m 644 -t $(TARGET_DIR)/etc/sensor $(BR2_EXTERNAL_INGENIC_PATH)/package/ingenic-osdrv-t30/files/sensor/*.yaml
 	# $(INSTALL) -m 644 -t $(TARGET_DIR)/etc/sensor $(BR2_EXTERNAL_INGENIC_PATH)/package/ingenic-osdrv-t30/files/sensor/params/bg0806.bin
diff --git a/general/package/ingenic-osdrv-t31/files/script/S95ingenic b/general/package/ingenic-osdrv-t31/files/script/S95ingenic
deleted file mode 100755
index 005dc6bf..00000000
--- a/general/package/ingenic-osdrv-t31/files/script/S95ingenic
+++ /dev/null
@@ -1,86 +0,0 @@
-#!/bin/sh
-
-DAEMON="majestic"
-PIDFILE="/var/run/$DAEMON.pid"
-
-DAEMON_ARGS="-s"
-
-# shellcheck source=/dev/null
-[ -r "/etc/default/$DAEMON" ] && . "/etc/default/$DAEMON"
-
-load_majestic() {
-	printf 'Starting %s: ' "$DAEMON"
-	[ -f /usr/bin/$DAEMON ] || echo -en "DISABLED, "
-	# shellcheck disable=SC2086 # we need the word splitting
-	[ -f /etc/coredump.conf ] && . /etc/coredump.conf
-	if [ "$coredump_enabled" ]; then
-		[ "$(yaml-cli -i /etc/majestic.yaml -g .watchdog.timeout)" -lt "30" ] && yaml-cli -i /etc/majestic.yaml -s .watchdog.timeout 30
-		ulimit -c unlimited && echo "|/usr/sbin/sendcoredump.sh" >/proc/sys/kernel/core_pattern
-	fi
-	start-stop-daemon -b -m -S -q -p "$PIDFILE" -x "/usr/bin/$DAEMON" \
-		-- $DAEMON_ARGS
-	status=$?
-	if [ "$status" -eq 0 ]; then
-		echo "OK"
-	else
-		echo "FAIL"
-	fi
-	return "$status"
-}
-
-# The daemon does not create a pidfile, and use "-m" to instruct start-stop-daemon to create one.
-start() {
-	logger -s -p daemon.info -t ingenic "Check MAC for Ingenic devices"
-	if [ "$(fw_printenv -n ethaddr)" = "00:00:23:34:45:66" ]; then
-		logger -s -p daemon.info -t ingenic "The eth0 interface has a lousy MAC, please change it.."
-	else
-		logger -s -p daemon.info -t ingenic "The eth0 interface has a correct MAC - $(fw_printenv -n ethaddr)"
-	fi
-	#
-	logger -s -p daemon.info -t ingenic "Loading of kernel modules and initialization of the video system has started"
-	export TZ=$(cat /etc/TZ)
-	load_ingenic
-	#
-	#
-	# export SENSOR=$(fw_printenv -n sensor)
-	export SENSOR=$(cat /proc/jz/sinfo/info | sed -e 's/.*://')
-	SENSOR=$(cat /proc/jz/sinfo/info | sed -e 's/.*://')
-	if [ "sensor not found" = "$SENSOR" ]; then
-		unset SENSOR
-	else
-		export SENSOR=$SENSOR
-	fi
-	load_majestic
-}
-
-stop() {
-	printf 'Stopping %s: ' "$DAEMON"
-	[ -f /usr/bin/$DAEMON ] || echo -en "DISABLED, "
-	start-stop-daemon -K -q -p "$PIDFILE"
-	status=$?
-	if [ "$status" -eq 0 ]; then
-		rm -f "$PIDFILE"
-		echo "OK"
-	else
-		echo "FAIL"
-	fi
-	return "$status"
-}
-
-restart() {
-	stop
-	sleep 1
-	reload
-}
-
-reload() {
-	load_majestic
-}
-
-case "$1" in
-	start|stop|restart|reload)
-		"$1";;
-	*)
-		echo "Usage: $0 {start|stop|restart|reload}"
-		exit 1
-esac
diff --git a/general/package/ingenic-osdrv-t31/files/script/load_ingenic b/general/package/ingenic-osdrv-t31/files/script/load_ingenic
index cce764d0..e53d58c4 100755
--- a/general/package/ingenic-osdrv-t31/files/script/load_ingenic
+++ b/general/package/ingenic-osdrv-t31/files/script/load_ingenic
@@ -1,9 +1,18 @@
 #!/bin/sh
 
-KMOD_PATH=/lib/modules/3.10.14__isvp_swan_1.0__/ingenic
+KMOD_PATH=/lib/modules/$(uname -r)/ingenic
+vendor=$(ipcinfo -v)
+
+if [ ! -f /usr/sbin/sensor_cli ]; then
+	ln -s /usr/sbin/extutils /usr/sbin/sensor_cli
+fi
 
 echo 1 >/proc/sys/vm/overcommit_memory
 
+log_vendor() {
+  logger -s -p daemon.info -t ${vendor} "$1"
+}
+
 check_return() {
     if [ $? -ne 0 ]; then
         echo err: $1
@@ -12,24 +21,40 @@ check_return() {
     fi
 }
 
-lsmod | grep "avpu" >/dev/null
-if [ $? -ne 0 ]; then
-    insmod ${KMOD_PATH/%\//}/avpu.ko clk_name='vpll' avpu_clk=400000000
-    check_return "insmod avpu"
-fi
+SENSOR_EXT_PARAM=""
+
+sync_sensor_param() {
+	STREAMER_RES=$(cli -g .video0.size)
+	STREAMER_FPS=$(cli -g .video0.fps)
+	if [ ! -z "${STREAMER_RES}" ] && [ ! -z "${STREAMER_FPS}" ]; then
+		CUR_SENSOR_RES="$(sensor_cli -g .sensor.width)x$(sensor_cli -g .sensor.height)"
+		if ! [ "${CUR_SENSOR_RES}" = "${STREAMER_RES}" ]; then
+			STREAMER_PARAM="${STREAMER_RES}x${STREAMER_FPS}"
+			RES_LIST=$(sensor_cli -g .sensor.resolutions)
+			for RES in $(echo ${RES_LIST} | tr ',' '\n')
+			do
+			  if [ "$(echo ${RES} | cut -d "_" -f1)" = "${STREAMER_PARAM}" ]; then
+				sensor_cli -s .sensor.width $(echo ${STREAMER_PARAM} | cut -d "x" -f1)
+				sensor_cli -s .sensor.height $(echo ${STREAMER_PARAM} | cut -d "x" -f2)
+				SENSOR_EXT_PARAM="sensor_resolution=$(echo ${RES} | cut -d "_" -f2) sensor_max_fps=$(echo ${STREAMER_FPS})"
+			  fi
+			done 
+		fi
+	fi
+}
 
 lsmod | grep "sinfo" >/dev/null
 if [ $? -ne 0 ]; then
     insmod ${KMOD_PATH/%\//}/sinfo.ko
     check_return "insmod sinfo"
 fi
-echo 1 >/proc/jz/sinfo/info
-check_return "start sinfo"
 
 if fw_printenv -n sensor >/dev/null; then
     export SENSOR=$(fw_printenv -n sensor)
-    logger -s -p daemon.info -t ingenic "Get data from environment and set SENSOR as ${SENSOR}"
+    log_vendor "Get data from environment and set SENSOR as ${SENSOR}"
 else
+	echo 1 >/proc/jz/sinfo/info
+	check_return "start sinfo"
     SENSOR_INFO=$(cat /proc/jz/sinfo/info)
     check_return "get sensor type"
     SENSOR=${SENSOR_INFO#*:}
@@ -37,62 +62,81 @@ else
         unset SENSOR
         fw_setenv sensor
     else
-        logger -s -p daemon.info -t ingenic "Get data from sinfo and set SENSOR as ${SENSOR}"
-        fw_setenv sensor $SENSOR && logger -s -p daemon.info -t ingenic "Write detected ${SENSOR} to U-Boot ENV"
+        log_vendor "Get data from sinfo and set SENSOR as ${SENSOR}"
+        fw_setenv sensor $SENSOR && log_vendor "Write detected ${SENSOR} to U-Boot ENV"
     fi
 fi
 
+sync_sensor_param
 
 case ${SENSOR} in
 "gc2053")
+    AVPU_PARAM="clk_name=vpll avpu_clk=400000000"
     ISP_PARAM="isp_clk=125000000"
-    SENSOR_PARAM="sensor_max_fps=25 data_interface=1"
+    SENSOR_PARAM="data_interface=1"
     ;;
 "gc2083")
+    AVPU_PARAM="clk_name=vpll avpu_clk=400000000"
     ISP_PARAM="isp_clk=200000000"
     SENSOR_PARAM="shvflip=1"
     ;;
 "gc4653")
+    AVPU_PARAM="clk_name=vpll avpu_clk=400000000"
     ISP_PARAM="isp_clk=200000000"
     SENSOR_PARAM=""
     ;;
 "imx307")
+    AVPU_PARAM="clk_name=vpll avpu_clk=400000000"
     ISP_PARAM="isp_clk=125000000"
     SENSOR_PARAM=""
     ;;
 "jxf37")
+    AVPU_PARAM="clk_name=vpll avpu_clk=400000000"
     ISP_PARAM="isp_clk=200000000 isp_memopt=1 isp_day_night_switch_drop_frame_num=1 isp_ch0_pre_dequeue_time=12 isp_ch0_pre_dequeue_interrupt_process=0 isp_ch0_pre_dequeue_valid_lines=540"
     SENSOR_PARAM="shvflip=1"
     ;;
 "jxh62")
+    AVPU_PARAM="clk_name=vpll avpu_clk=400000000"
     ISP_PARAM=""
     SENSOR_PARAM=""
     ;;
 "jxq03"|"jxq03p")
+    AVPU_PARAM="clk_name=vpll avpu_clk=400000000"
     ISP_PARAM="isp_clk=150000000"
     SENSOR_PARAM=""
     ;;
 "sc200ai")
+    AVPU_PARAM="clk_name=vpll avpu_clk=400000000"
     ISP_PARAM="isp_clk=100000000 isp_ch0_pre_dequeue_time=20 isp_ch0_pre_dequeue_interrupt_process=0 isp_memopt=1"
     SENSOR_PARAM="shvflip=1"
     ;;
 "sc2232")
+    AVPU_PARAM="clk_name=vpll avpu_clk=400000000"
     ISP_PARAM="isp_clk=125000000"
     SENSOR_PARAM=""
     ;;
 "sc2335")
+    AVPU_PARAM="clk_name=vpll avpu_clk=400000000"
     ISP_PARAM="isp_clk=100000000 isp_ch0_pre_dequeue_time=20 isp_ch0_pre_dequeue_interrupt_process=0 isp_memopt=1"
     SENSOR_PARAM=""
     ;;
+"sc3335")
+    AVPU_PARAM="clk_name=mpll avpu_clk=500000000"
+    ISP_PARAM="isp_clk=200000000 isp_memopt=1"
+    SENSOR_PARAM=""
+    ;;
 "sc3338")
+	AVPU_PARAM="clk_name=vpll avpu_clk=400000000"
     ISP_PARAM="isp_clk=150000000"
     SENSOR_PARAM=""
     ;;
 "sc5235")
+	AVPU_PARAM="clk_name=vpll avpu_clk=400000000"
     ISP_PARAM="isp_clk=200000000"
     SENSOR_PARAM=""
     ;;
 *)
+	AVPU_PARAM="clk_name=vpll avpu_clk=400000000"
     ISP_PARAM="isp_clk=125000000"
     SENSOR_PARAM=""
     break
@@ -100,32 +144,38 @@ case ${SENSOR} in
 esac
 
 echo --------------------
+echo "AVPU_PARAM: ${AVPU_PARAM}"
 echo "ISP_PARAM: ${ISP_PARAM}"
 echo "SENSOR: ${SENSOR}"
 echo "SENSOR_PARAM: ${SENSOR_PARAM}"
 echo --------------------
 
+lsmod | grep "avpu" >/dev/null
+if [ $? -ne 0 ]; then
+    insmod ${KMOD_PATH/%\//}/avpu.ko ${AVPU_PARAM}
+    check_return "insmod avpu"
+fi
+
 lsmod | grep "tx_isp" >/dev/null
 if [ $? -ne 0 ]; then
     insmod ${KMOD_PATH/%\//}/tx-isp-t31.ko ${ISP_PARAM}
     check_return "insmod isp drv"
 fi
 
+lsmod | grep ${SENSOR} >/dev/null
+if [ $? -ne 0 ]; then
+    insmod ${KMOD_PATH/%\//}/sensor_${SENSOR}_t31.ko ${SENSOR_PARAM} ${SENSOR_EXT_PARAM}
+    check_return "insmod sensor drv"
+fi
+
 lsmod | grep "audio" >/dev/null
 if [ $? -ne 0 ]; then
     insmod ${KMOD_PATH/%\//}/audio.ko
     check_return "insmod audio"
 fi
 
-lsmod | grep ${SENSOR} >/dev/null
-if [ $? -ne 0 ]; then
-    insmod ${KMOD_PATH/%\//}/sensor_${SENSOR}_t31.ko ${SENSOR_PARAM}
-    check_return "insmod sensor drv"
-fi
-#
-# Need for claim gpio 57,58 on HICHIP (CamHi/Xin) boards
+# Need for claim gpio
 insmod ${KMOD_PATH/%\//}/gpio.ko
-echo $(yaml-cli -i /etc/majestic.yaml -g .nightMode.irCutPin1) >/proc/jz/claim/gpio
-echo $(yaml-cli -i /etc/majestic.yaml -g .nightMode.irCutPin2) >/proc/jz/claim/gpio
-# echo $(yaml-cli -i /etc/majestic.yaml -g .nightMode.irSensorPin) >/proc/jz/claim/gpio
-#
+echo $(cli -g .nightMode.irCutPin1) >/proc/jz/claim/gpio
+echo $(cli -g .nightMode.irCutPin2) >/proc/jz/claim/gpio
+# echo $(cli -g .nightMode.irSensorPin) >/proc/jz/claim/gpio
diff --git a/general/package/ingenic-osdrv-t31/files/sensor/gc4653.yaml b/general/package/ingenic-osdrv-t31/files/sensor/gc4653.yaml
index 79ee5693..516518d2 100644
--- a/general/package/ingenic-osdrv-t31/files/sensor/gc4653.yaml
+++ b/general/package/ingenic-osdrv-t31/files/sensor/gc4653.yaml
@@ -4,3 +4,4 @@ sensor:
   width: 2560
   height: 1440
   bus: i2c
+  resolutions: 2560x1440x25_400,1920x1080x60_300,1280x720x60_100
diff --git a/general/package/ingenic-osdrv-t31/ingenic-osdrv-t31.mk b/general/package/ingenic-osdrv-t31/ingenic-osdrv-t31.mk
index c5f5b08d..e1cab09d 100644
--- a/general/package/ingenic-osdrv-t31/ingenic-osdrv-t31.mk
+++ b/general/package/ingenic-osdrv-t31/ingenic-osdrv-t31.mk
@@ -10,9 +10,6 @@ INGENIC_OSDRV_T31_LICENSE = MIT
 INGENIC_OSDRV_T31_LICENSE_FILES = LICENSE
 
 define INGENIC_OSDRV_T31_INSTALL_TARGET_CMDS
-	$(INSTALL) -m 755 -d $(TARGET_DIR)/etc/init.d
-	$(INSTALL) -m 755 -t $(TARGET_DIR)/etc/init.d $(BR2_EXTERNAL_INGENIC_PATH)/package/ingenic-osdrv-t31/files/script/S95ingenic
-
 	$(INSTALL) -m 755 -d $(TARGET_DIR)/etc/sensor
 	$(INSTALL) -m 644 -t $(TARGET_DIR)/etc/sensor $(BR2_EXTERNAL_INGENIC_PATH)/package/ingenic-osdrv-t31/files/sensor/*.yaml
 	# $(INSTALL) -m 644 -t $(TARGET_DIR)/etc/sensor $(BR2_EXTERNAL_INGENIC_PATH)/package/ingenic-osdrv-t31/files/sensor/params/*.bin
@@ -57,7 +54,6 @@ define INGENIC_OSDRV_T31_INSTALL_TARGET_CMDS
 	$(INSTALL) -m 755 -d $(TARGET_DIR)/usr/bin
 	$(INSTALL) -m 755 -t $(TARGET_DIR)/usr/bin $(BR2_EXTERNAL_INGENIC_PATH)/package/ingenic-osdrv-t31/files/script/load*
 	$(INSTALL) -m 755 -t $(TARGET_DIR)/usr/bin $(BR2_EXTERNAL_INGENIC_PATH)/package/ingenic-osdrv-t31/files/script/ircut_demo
-	# $(INSTALL) -m 755 -t $(TARGET_DIR)/usr/bin $(BR2_EXTERNAL_INGENIC_PATH)/package/ingenic-osdrv-t31/files/sample/*
 
 	# $(INSTALL) -m 755 -d $(TARGET_DIR)/usr/lib/sensors/params
 	# $(INSTALL) -m 644 -t $(TARGET_DIR)/usr/lib/sensors/params $(BR2_EXTERNAL_INGENIC_PATH)/package/ingenic-osdrv-t31/files/sensor/params/*.bin
diff --git a/general/package/ingenic-osdrv-t40/files/script/S95ingenic b/general/package/ingenic-osdrv-t40/files/script/S95ingenic
deleted file mode 100755
index 005dc6bf..00000000
--- a/general/package/ingenic-osdrv-t40/files/script/S95ingenic
+++ /dev/null
@@ -1,86 +0,0 @@
-#!/bin/sh
-
-DAEMON="majestic"
-PIDFILE="/var/run/$DAEMON.pid"
-
-DAEMON_ARGS="-s"
-
-# shellcheck source=/dev/null
-[ -r "/etc/default/$DAEMON" ] && . "/etc/default/$DAEMON"
-
-load_majestic() {
-	printf 'Starting %s: ' "$DAEMON"
-	[ -f /usr/bin/$DAEMON ] || echo -en "DISABLED, "
-	# shellcheck disable=SC2086 # we need the word splitting
-	[ -f /etc/coredump.conf ] && . /etc/coredump.conf
-	if [ "$coredump_enabled" ]; then
-		[ "$(yaml-cli -i /etc/majestic.yaml -g .watchdog.timeout)" -lt "30" ] && yaml-cli -i /etc/majestic.yaml -s .watchdog.timeout 30
-		ulimit -c unlimited && echo "|/usr/sbin/sendcoredump.sh" >/proc/sys/kernel/core_pattern
-	fi
-	start-stop-daemon -b -m -S -q -p "$PIDFILE" -x "/usr/bin/$DAEMON" \
-		-- $DAEMON_ARGS
-	status=$?
-	if [ "$status" -eq 0 ]; then
-		echo "OK"
-	else
-		echo "FAIL"
-	fi
-	return "$status"
-}
-
-# The daemon does not create a pidfile, and use "-m" to instruct start-stop-daemon to create one.
-start() {
-	logger -s -p daemon.info -t ingenic "Check MAC for Ingenic devices"
-	if [ "$(fw_printenv -n ethaddr)" = "00:00:23:34:45:66" ]; then
-		logger -s -p daemon.info -t ingenic "The eth0 interface has a lousy MAC, please change it.."
-	else
-		logger -s -p daemon.info -t ingenic "The eth0 interface has a correct MAC - $(fw_printenv -n ethaddr)"
-	fi
-	#
-	logger -s -p daemon.info -t ingenic "Loading of kernel modules and initialization of the video system has started"
-	export TZ=$(cat /etc/TZ)
-	load_ingenic
-	#
-	#
-	# export SENSOR=$(fw_printenv -n sensor)
-	export SENSOR=$(cat /proc/jz/sinfo/info | sed -e 's/.*://')
-	SENSOR=$(cat /proc/jz/sinfo/info | sed -e 's/.*://')
-	if [ "sensor not found" = "$SENSOR" ]; then
-		unset SENSOR
-	else
-		export SENSOR=$SENSOR
-	fi
-	load_majestic
-}
-
-stop() {
-	printf 'Stopping %s: ' "$DAEMON"
-	[ -f /usr/bin/$DAEMON ] || echo -en "DISABLED, "
-	start-stop-daemon -K -q -p "$PIDFILE"
-	status=$?
-	if [ "$status" -eq 0 ]; then
-		rm -f "$PIDFILE"
-		echo "OK"
-	else
-		echo "FAIL"
-	fi
-	return "$status"
-}
-
-restart() {
-	stop
-	sleep 1
-	reload
-}
-
-reload() {
-	load_majestic
-}
-
-case "$1" in
-	start|stop|restart|reload)
-		"$1";;
-	*)
-		echo "Usage: $0 {start|stop|restart|reload}"
-		exit 1
-esac
diff --git a/general/package/ingenic-osdrv-t40/files/script/load_ingenic b/general/package/ingenic-osdrv-t40/files/script/load_ingenic
index a621c74b..8372d53f 100755
--- a/general/package/ingenic-osdrv-t40/files/script/load_ingenic
+++ b/general/package/ingenic-osdrv-t40/files/script/load_ingenic
@@ -1,9 +1,18 @@
 #!/bin/sh
 
-KMOD_PATH=/lib/modules/4.4.94/ingenic
+KMOD_PATH=/lib/modules/$(uname -r)/ingenic
+vendor=$(ipcinfo -v)
+
+if [ ! -f /usr/sbin/sensor_cli ]; then
+	ln -s /usr/sbin/extutils /usr/sbin/sensor_cli
+fi
 
 echo 1 >/proc/sys/vm/overcommit_memory
 
+log_vendor() {
+  logger -s -p daemon.info -t ${vendor} "$1"
+}
+
 check_return() {
     if [ $? -ne 0 ]; then
         echo err: $1
@@ -17,22 +26,22 @@ if [ $? -ne 0 ]; then
     insmod ${KMOD_PATH/%\//}/sinfo.ko
     check_return "insmod sinfo"
 fi
-echo 1 >/proc/jz/sinfo/info
-check_return "start sinfo"
 
 if fw_printenv -n sensor >/dev/null; then
     export SENSOR=$(fw_printenv -n sensor)
-    logger -s -p daemon.info -t ingenic "Get data from environment and set SENSOR as ${SENSOR}"
+    log_vendor "Get data from environment and set SENSOR as ${SENSOR}"
 else
-    SENSOR_INFO=$(cat /proc/jz/sinfo/info)
-    check_return "get sensor type"
-    SENSOR=${SENSOR_INFO#*:}
+	echo 1 >/proc/jz/sinfo/info
+	check_return "start sinfo"
+	SENSOR_INFO=$(cat /proc/jz/sinfo/info)
+	check_return "get sensor type"
+	SENSOR=${SENSOR_INFO#*:}
     if [ "sensor not found" = "$SENSOR" ]; then
         unset SENSOR
         fw_setenv sensor
     else
-        logger -s -p daemon.info -t ingenic "Get data from sinfo and set SENSOR as ${SENSOR}"
-        fw_setenv sensor $SENSOR && logger -s -p daemon.info -t ingenic "Write detected ${SENSOR} to U-Boot ENV"
+        log_vendor "Get data from sinfo and set SENSOR as ${SENSOR}"
+        fw_setenv sensor $SENSOR && log_vendor "Write detected ${SENSOR} to U-Boot ENV"
     fi
 fi
 
@@ -79,21 +88,20 @@ if [ $? -ne 0 ]; then
     check_return "insmod isp drv"
 fi
 
+lsmod | grep ${SENSOR} >/dev/null
+if [ $? -ne 0 ]; then
+    insmod ${KMOD_PATH/%\//}/sensor_${SENSOR}_t40.ko ${SENSOR_PARAM}
+    check_return "insmod sensor drv"
+fi
+
 lsmod | grep "audio" >/dev/null
 if [ $? -ne 0 ]; then
     insmod ${KMOD_PATH/%\//}/audio.ko
     check_return "insmod audio"
 fi
 
-lsmod | grep ${SENSOR} >/dev/null
-if [ $? -ne 0 ]; then
-    insmod ${KMOD_PATH/%\//}/sensor_${SENSOR}_t40.ko ${SENSOR_PARAM}
-    check_return "insmod sensor drv"
-fi
-#
 # Need for claim gpio
 insmod ${KMOD_PATH/%\//}/gpio.ko
 echo $(yaml-cli -i /etc/majestic.yaml -g .nightMode.irCutPin1) >/proc/jz/claim/gpio
 echo $(yaml-cli -i /etc/majestic.yaml -g .nightMode.irCutPin2) >/proc/jz/claim/gpio
 # echo $(yaml-cli -i /etc/majestic.yaml -g .nightMode.irSensorPin) >/proc/jz/claim/gpio
-#
diff --git a/general/package/ingenic-osdrv-t40/ingenic-osdrv-t40.mk b/general/package/ingenic-osdrv-t40/ingenic-osdrv-t40.mk
index 5b3af4da..b79f27ad 100644
--- a/general/package/ingenic-osdrv-t40/ingenic-osdrv-t40.mk
+++ b/general/package/ingenic-osdrv-t40/ingenic-osdrv-t40.mk
@@ -10,9 +10,6 @@ INGENIC_OSDRV_T40_LICENSE = MIT
 INGENIC_OSDRV_T40_LICENSE_FILES = LICENSE
 
 define INGENIC_OSDRV_T40_INSTALL_TARGET_CMDS
-	$(INSTALL) -m 755 -d $(TARGET_DIR)/etc/init.d
-	$(INSTALL) -m 755 -t $(TARGET_DIR)/etc/init.d $(BR2_EXTERNAL_INGENIC_PATH)/package/ingenic-osdrv-t40/files/script/S95ingenic
-
 	$(INSTALL) -m 755 -d $(TARGET_DIR)/etc/sensor
 	$(INSTALL) -m 644 -t $(TARGET_DIR)/etc/sensor $(BR2_EXTERNAL_INGENIC_PATH)/package/ingenic-osdrv-t40/files/sensor/*.yaml
 
diff --git a/general/package/goke-osdrv-gk710x/files/script/S95goke b/general/package/majestic/files/S95majestic
similarity index 64%
rename from general/package/goke-osdrv-gk710x/files/script/S95goke
rename to general/package/majestic/files/S95majestic
index 91ef0680..cca0ace3 100755
--- a/general/package/goke-osdrv-gk710x/files/script/S95goke
+++ b/general/package/majestic/files/S95majestic
@@ -14,11 +14,10 @@ load_majestic() {
 	# shellcheck disable=SC2086 # we need the word splitting
 	[ -f /etc/coredump.conf ] && . /etc/coredump.conf
 	if [ "$coredump_enabled" ]; then
-		[ "$(yaml-cli -i /etc/majestic.yaml -g .watchdog.timeout)" -lt "30" ] && yaml-cli -i /etc/majestic.yaml -s .watchdog.timeout 30
+		[ "$(cli -g .watchdog.timeout)" -lt "30" ] && cli -s .watchdog.timeout 30
 		ulimit -c unlimited && echo "|/usr/sbin/sendcoredump.sh" >/proc/sys/kernel/core_pattern
 	fi
-	start-stop-daemon -b -m -S -q -p "$PIDFILE" -x "/usr/bin/$DAEMON" \
-		-- $DAEMON_ARGS
+	start-stop-daemon -b -m -S -q -p "$PIDFILE" -x "/usr/bin/$DAEMON" -- $DAEMON_ARGS
 	status=$?
 	if [ "$status" -eq 0 ]; then
 		echo "OK"
@@ -30,18 +29,9 @@ load_majestic() {
 
 # The daemon does not create a pidfile, and use "-m" to instruct start-stop-daemon to create one.
 start() {
-	logger -s -p daemon.info -t goke "Checking MAC address"
-	if [ "$(fw_printenv -n ethaddr)" = "00:00:23:34:45:66" ]; then
-		logger -s -p daemon.info -t goke "The eth0 interface has a lousy MAC, you have to change it.."
-	else
-		logger -s -p daemon.info -t goke "The eth0 interface has a correct MAC - $(fw_printenv -n ethaddr)"
-	fi
-	#
-	logger -s -p daemon.info -t goke "Loading of kernel modules and initialization of the video system has started"
-	export TZ=$(cat /etc/TZ)
-	# load_goke
-	#
-	# load_majestic
+	logger -s -p daemon.info -t $(ipcinfo -v) "Loading video system has started..."
+	export SENSOR=$(fw_printenv -n sensor)
+	load_majestic
 }
 
 stop() {
diff --git a/general/package/majestic/majestic.mk b/general/package/majestic/majestic.mk
index 085f9335..50fde59b 100644
--- a/general/package/majestic/majestic.mk
+++ b/general/package/majestic/majestic.mk
@@ -44,6 +44,9 @@ define MAJESTIC_INSTALL_TARGET_CMDS
 
 	$(INSTALL) -m 755 -d $(TARGET_DIR)/usr/bin
 	$(INSTALL) -m 755 -t $(TARGET_DIR)/usr/bin $(@D)/majestic
+
+	$(INSTALL) -m 755 -d $(TARGET_DIR)/etc/init.d
+	cp ../general/package/majestic/files/S95majestic $(TARGET_DIR)/etc/init.d
 endef
 
 $(eval $(generic-package))
diff --git a/general/package/novatek-osdrv-nt9856x/files/script/S95novatek b/general/package/novatek-osdrv-nt9856x/files/script/S95novatek
deleted file mode 100755
index 024fecca..00000000
--- a/general/package/novatek-osdrv-nt9856x/files/script/S95novatek
+++ /dev/null
@@ -1,78 +0,0 @@
-#!/bin/sh
-
-DAEMON="majestic"
-PIDFILE="/var/run/$DAEMON.pid"
-
-DAEMON_ARGS="-s"
-
-# shellcheck source=/dev/null
-[ -r "/etc/default/$DAEMON" ] && . "/etc/default/$DAEMON"
-
-load_majestic() {
-	printf 'Starting %s: ' "$DAEMON"
-	[ -f /usr/bin/$DAEMON ] || echo -en "DISABLED, "
-	# shellcheck disable=SC2086 # we need the word splitting
-	[ -f /etc/coredump.conf ] && . /etc/coredump.conf
-	if [ "$coredump_enabled" ]; then
-		[ "$(yaml-cli -i /etc/majestic.yaml -g .watchdog.timeout)" -lt "30" ] && yaml-cli -i /etc/majestic.yaml -s .watchdog.timeout 30
-		ulimit -c unlimited && echo "|/usr/sbin/sendcoredump.sh" >/proc/sys/kernel/core_pattern
-	fi
-	start-stop-daemon -b -m -S -q -p "$PIDFILE" -x "/usr/bin/$DAEMON" \
-		-- $DAEMON_ARGS
-	status=$?
-	if [ "$status" -eq 0 ]; then
-		echo "OK"
-	else
-		echo "FAIL"
-	fi
-	return "$status"
-}
-
-# The daemon does not create a pidfile, and use "-m" to instruct start-stop-daemon to create one.
-start() {
-	logger -s -p daemon.info -t novatek "Check MAC for Novatek devices"
-	if [ "$(fw_printenv -n ethaddr)" = "00:00:23:34:45:66" ]; then
-		logger -s -p daemon.info -t novatek "The eth0 interface has a lousy MAC, let's try to change it.."
-		XMMAC="$(ipcinfo --xm-mac)" && [ -n "${XMMAC}" ] && fw_setenv ethaddr ${XMMAC} && reboot -f || logger -s -p daemon.info -t novatek "It is not possible to install a new MAC on the eth0 interface.."
-	else
-		logger -s -p daemon.info -t novatek "The eth0 interface has a correct MAC - $(fw_printenv -n ethaddr)"
-	fi
-	#
-	logger -s -p daemon.info -t novatek "Loading of kernel modules and initialization of the video system has started"
-	export TZ=$(cat /etc/TZ)
-	load_novatek -i
-	#
-	load_majestic
-}
-
-stop() {
-	printf 'Stopping %s: ' "$DAEMON"
-	[ -f /usr/bin/$DAEMON ] || echo -en "DISABLED, "
-	start-stop-daemon -K -q -p "$PIDFILE"
-	status=$?
-	if [ "$status" -eq 0 ]; then
-		rm -f "$PIDFILE"
-		echo "OK"
-	else
-		echo "FAIL"
-	fi
-	return "$status"
-}
-
-restart() {
-	stop
-	sleep 1
-	reload
-}
-
-reload() {
-	load_majestic
-}
-
-case "$1" in
-	start|stop|restart|reload)
-		"$1";;
-	*)
-		echo "Usage: $0 {start|stop|restart|reload}"
-		exit 1
-esac
diff --git a/general/package/novatek-osdrv-nt9856x/novatek-osdrv-nt9856x.mk b/general/package/novatek-osdrv-nt9856x/novatek-osdrv-nt9856x.mk
index 0b7ccd00..a7ac4ad1 100644
--- a/general/package/novatek-osdrv-nt9856x/novatek-osdrv-nt9856x.mk
+++ b/general/package/novatek-osdrv-nt9856x/novatek-osdrv-nt9856x.mk
@@ -10,9 +10,6 @@ NOVATEK_OSDRV_NT9856X_LICENSE = MIT
 NOVATEK_OSDRV_NT9856X_LICENSE_FILES = LICENSE
 
 define NOVATEK_OSDRV_NT9856X_INSTALL_TARGET_CMDS
-	$(INSTALL) -m 755 -d $(TARGET_DIR)/etc/init.d
-	$(INSTALL) -m 755 -t $(TARGET_DIR)/etc/init.d $(BR2_EXTERNAL_NOVATEK_PATH)/package/novatek-osdrv-nt9856x/files/script/S95novatek
-
 	$(INSTALL) -m 755 -d $(TARGET_DIR)/etc/sensors
 	$(INSTALL) -m 644 -t $(TARGET_DIR)/etc/sensors $(BR2_EXTERNAL_NOVATEK_PATH)/package/novatek-osdrv-nt9856x/files/sensor/config/sen_sc*.cfg
 	$(INSTALL) -m 644 -t $(TARGET_DIR)/etc/sensors $(BR2_EXTERNAL_NOVATEK_PATH)/package/novatek-osdrv-nt9856x/files/sensor/*.yaml
diff --git a/general/package/rockchip-osdrv-rv11xx/files/script/S95rockchip b/general/package/rockchip-osdrv-rv11xx/files/script/S95rockchip
deleted file mode 100755
index 1df0ffb8..00000000
--- a/general/package/rockchip-osdrv-rv11xx/files/script/S95rockchip
+++ /dev/null
@@ -1,80 +0,0 @@
-#!/bin/sh
-
-DAEMON="majestic"
-PIDFILE="/var/run/$DAEMON.pid"
-
-DAEMON_ARGS="-s"
-
-# shellcheck source=/dev/null
-[ -r "/etc/default/$DAEMON" ] && . "/etc/default/$DAEMON"
-
-load_majestic() {
-	printf 'Starting %s: ' "$DAEMON"
-	[ -f /usr/bin/$DAEMON ] || echo -en "DISABLED, "
-	# shellcheck disable=SC2086 # we need the word splitting
-	[ -f /etc/coredump.conf ] && . /etc/coredump.conf
-	if [ "$coredump_enabled" ]; then
-		[ "$(yaml-cli -i /etc/majestic.yaml -g .watchdog.timeout)" -lt "30" ] && yaml-cli -i /etc/majestic.yaml -s .watchdog.timeout 30
-		ulimit -c unlimited && echo "|/usr/sbin/sendcoredump.sh" >/proc/sys/kernel/core_pattern
-	fi
-	start-stop-daemon -b -m -S -q -p "$PIDFILE" -x "/usr/bin/$DAEMON" \
-		-- $DAEMON_ARGS
-	status=$?
-	if [ "$status" -eq 0 ]; then
-		echo "OK"
-	else
-		echo "FAIL"
-	fi
-	return "$status"
-}
-
-# The daemon does not create a pidfile, and use "-m" to instruct start-stop-daemon to create one.
-start() {
-	logger -s -p daemon.info -t rockchip "Check MAC for rockchip devices"
-	if [ "$(fw_printenv -n ethaddr)" = "00:00:23:34:45:66" ]; then
-		logger -s -p daemon.info -t rockchip "The eth0 interface has a lousy MAC, let's try to change it.."
-		XMMAC="$(ipcinfo --xm-mac)" && [ -n "${XMMAC}" ] && fw_setenv ethaddr ${XMMAC} && reboot -f || logger -s -p daemon.info -t rockchip "It is not possible to install a new MAC on the eth0 interface.."
-	else
-		logger -s -p daemon.info -t rockchip "The eth0 interface has a correct MAC - $(fw_printenv -n ethaddr)"
-	fi
-	#
-	logger -s -p daemon.info -t rockchip "Loading of kernel modules and initialization of the video system has started"
-	export TZ=$(cat /etc/TZ)
-	#load_rockchip
-	#
-	export SENSOR=$(fw_printenv -n sensor)
-	#load_majestic
-}
-
-stop() {
-	printf 'Stopping %s: ' "$DAEMON"
-	[ -f /usr/bin/$DAEMON ] || echo -en "DISABLED, "
-	start-stop-daemon -K -q -p "$PIDFILE"
-	status=$?
-	if [ "$status" -eq 0 ]; then
-		rm -f "$PIDFILE"
-		echo "OK"
-	else
-		echo "FAIL"
-	fi
-	return "$status"
-}
-
-restart() {
-	stop
-	sleep 1
-	reload
-}
-
-reload() {
-	load_majestic
-}
-
-case "$1" in
-	start|stop|restart|reload)
-		"$1";;
-	*)
-		echo "Usage: $0 {start|stop|restart|reload}"
-		exit 1
-esac
-
diff --git a/general/package/rockchip-osdrv-rv11xx/files/script/load_rockchip b/general/package/rockchip-osdrv-rv11xx/files/script/load_rockchip
index e69de29b..1a248525 100755
--- a/general/package/rockchip-osdrv-rv11xx/files/script/load_rockchip
+++ b/general/package/rockchip-osdrv-rv11xx/files/script/load_rockchip
@@ -0,0 +1 @@
+#!/bin/sh
diff --git a/general/package/rockchip-osdrv-rv11xx/rockchip-osdrv-rv11xx.mk b/general/package/rockchip-osdrv-rv11xx/rockchip-osdrv-rv11xx.mk
index 4a07fb91..36153efc 100644
--- a/general/package/rockchip-osdrv-rv11xx/rockchip-osdrv-rv11xx.mk
+++ b/general/package/rockchip-osdrv-rv11xx/rockchip-osdrv-rv11xx.mk
@@ -10,9 +10,6 @@ ROCKCHIP_OSDRV_RV11XX_LICENSE = MIT
 ROCKCHIP_OSDRV_RV11XX_LICENSE_FILES = LICENSE
 
 define ROCKCHIP_OSDRV_RV11XX_INSTALL_TARGET_CMDS
-	$(INSTALL) -m 755 -d $(TARGET_DIR)/etc/init.d
-	$(INSTALL) -m 755 -t $(TARGET_DIR)/etc/init.d $(BR2_EXTERNAL_ROCKCHIP_PATH)/package/rockchip-osdrv-rv11xx/files/script/S95rockchip
-
 	$(INSTALL) -m 755 -d $(TARGET_DIR)/etc/sensors
 	# $(INSTALL) -m 644 -t $(TARGET_DIR)/etc/sensors $(BR2_EXTERNAL_ROCKCHIP_PATH)/package/rockchip-osdrv-rv11xx/files/sensor/config/*
 
@@ -21,7 +18,6 @@ define ROCKCHIP_OSDRV_RV11XX_INSTALL_TARGET_CMDS
 
 	$(INSTALL) -m 755 -d $(TARGET_DIR)/usr/bin
 	$(INSTALL) -m 755 -t $(TARGET_DIR)/usr/bin $(BR2_EXTERNAL_ROCKCHIP_PATH)/package/rockchip-osdrv-rv11xx/files/script/load*
-	# $(INSTALL) -m 755 -t $(TARGET_DIR)/usr/bin $(BR2_EXTERNAL_ROCKCHIP_PATH)/package/rockchip-osdrv-rv11xx/files/sample/*
 
 	$(INSTALL) -m 755 -d $(TARGET_DIR)/usr/lib/sensors
 	# $(INSTALL) -m 644 -t $(TARGET_DIR)/usr/lib/sensors $(BR2_EXTERNAL_ROCKCHIP_PATH)/package/rockchip-osdrv-rv11xx/files/sensor/*.so
diff --git a/general/package/sigmastar-osdrv-infinity6e/files/script/init.d/S80sigmastar b/general/package/sigmastar-osdrv-infinity6e/files/script/init.d/S80sigmastar
deleted file mode 100755
index d3e552e0..00000000
--- a/general/package/sigmastar-osdrv-infinity6e/files/script/init.d/S80sigmastar
+++ /dev/null
@@ -1,71 +0,0 @@
-#!/bin/sh
-DAEMON="majestic"
-PIDFILE="/var/run/$DAEMON.pid"
-DAEMON_ARGS="-s"
-
-[ -r "/etc/default/$DAEMON" ] && . "/etc/default/$DAEMON"
-
-load_majestic() {
-	printf 'Starting %s: ' "$DAEMON"
-	[ -f /usr/bin/$DAEMON ] || echo -en "DISABLED, "
-	[ -f /etc/coredump.conf ] && . /etc/coredump.conf
-	if [ "$coredump_enabled" ]; then
-		[ "$(yaml-cli -i /etc/majestic.yaml -g .watchdog.timeout)" -lt "30" ] && yaml-cli -i /etc/majestic.yaml -s .watchdog.timeout 30
-		ulimit -c unlimited && echo "|/usr/sbin/sendcoredump.sh" >/proc/sys/kernel/core_pattern
-	fi
-	start-stop-daemon -b -m -S -q -p "$PIDFILE" -x "/usr/bin/$DAEMON" -- $DAEMON_ARGS
-	status=$?
-	if [ "$status" -eq 0 ]; then
-		echo "OK"
-	else
-		echo "FAIL"
-	fi
-	return "$status"
-}
-
-# The daemon does not create a pidfile, and use "-m" to instruct start-stop-daemon to create one.
-start() {
-	logger -s -p daemon.info -t sigmastar "Check MAC for Sigmastar devices"
-	if [ "$(fw_printenv -n ethaddr)" = "00:00:23:34:45:66" ]; then
-		logger -s -p daemon.info -t sigmastar "The eth0 interface has a lousy MAC, let's try to change it.."
-	else
-		logger -s -p daemon.info -t sigmastar "The eth0 interface has a correct MAC - $(fw_printenv -n ethaddr)"
-	fi
-	logger -s -p daemon.info -t sigmastar "Loading of kernel modules and initialization of the video system has started"
-	export TZ=$(cat /etc/TZ)
-	load_sigmastar
-	load_majestic
-}
-
-stop() {
-	printf 'Stopping %s: ' "$DAEMON"
-	[ -f /usr/bin/$DAEMON ] || echo -en "DISABLED, "
-	start-stop-daemon -K -q -p "$PIDFILE"
-	status=$?
-	if [ "$status" -eq 0 ]; then
-		rm -f "$PIDFILE"
-		echo "OK"
-	else
-		echo "FAIL"
-	fi
-	return "$status"
-}
-
-restart() {
-	stop
-	sleep 1
-	reload
-}
-
-reload() {
-	load_majestic
-}
-
-case "$1" in
-	start|stop|restart|reload)
-		"$1"
-		;;
-	*)
-		echo "Usage: $0 {start|stop|restart|reload}"
-		exit 1
-esac
diff --git a/general/package/sigmastar-osdrv-infinity6e/sigmastar-osdrv-infinity6e.mk b/general/package/sigmastar-osdrv-infinity6e/sigmastar-osdrv-infinity6e.mk
index 7eaf9508..3aba48d8 100644
--- a/general/package/sigmastar-osdrv-infinity6e/sigmastar-osdrv-infinity6e.mk
+++ b/general/package/sigmastar-osdrv-infinity6e/sigmastar-osdrv-infinity6e.mk
@@ -15,9 +15,6 @@ define SIGMASTAR_OSDRV_INFINITY6E_INSTALL_TARGET_CMDS
 	$(INSTALL) -m 755 -d $(TARGET_DIR)/usr/bin
 	$(INSTALL) -m 755 -t $(TARGET_DIR)/usr/bin $(SIGMASTAR_OSDRV_INFINITY6E_PATH)/script/bin/*
 
-	$(INSTALL) -m 755 -d $(TARGET_DIR)/etc/init.d
-	$(INSTALL) -m 755 -t $(TARGET_DIR)/etc/init.d $(SIGMASTAR_OSDRV_INFINITY6E_PATH)/script/init.d/*
-
 	$(INSTALL) -m 755 -d $(TARGET_DIR)/lib/modules/4.9.84/sigmastar
 	$(INSTALL) -m 644 -t $(TARGET_DIR)/lib/modules/4.9.84/sigmastar $(SIGMASTAR_OSDRV_INFINITY6E_PATH)/kmod/*.ko
 	$(INSTALL) -m 644 -t $(TARGET_DIR)/lib/modules/4.9.84/sigmastar $(SIGMASTAR_OSDRV_INFINITY6E_PATH)/sensor/kmod/*.ko
diff --git a/general/package/sigmastar-osdrv-msc313e/files/script/S95sigmastar b/general/package/sigmastar-osdrv-msc313e/files/script/S95sigmastar
deleted file mode 100755
index 076d7e18..00000000
--- a/general/package/sigmastar-osdrv-msc313e/files/script/S95sigmastar
+++ /dev/null
@@ -1,77 +0,0 @@
-#!/bin/sh
-
-DAEMON="majestic"
-PIDFILE="/var/run/$DAEMON.pid"
-
-DAEMON_ARGS="-s"
-
-# shellcheck source=/dev/null
-[ -r "/etc/default/$DAEMON" ] && . "/etc/default/$DAEMON"
-
-load_majestic() {
-	printf 'Starting %s: ' "$DAEMON"
-	[ -f /usr/bin/$DAEMON ] || echo -en "DISABLED, "
-	# shellcheck disable=SC2086 # we need the word splitting
-	[ -f /etc/coredump.conf ] && . /etc/coredump.conf
-	if [ "$coredump_enabled" ]; then
-		[ "$(yaml-cli -i /etc/majestic.yaml -g .watchdog.timeout)" -lt "30" ] && yaml-cli -i /etc/majestic.yaml -s .watchdog.timeout 30
-		ulimit -c unlimited && echo "|/usr/sbin/sendcoredump.sh" >/proc/sys/kernel/core_pattern
-	fi
-	start-stop-daemon -b -m -S -q -p "$PIDFILE" -x "/usr/bin/$DAEMON" \
-		-- $DAEMON_ARGS
-	status=$?
-	if [ "$status" -eq 0 ]; then
-		echo "OK"
-	else
-		echo "FAIL"
-	fi
-	return "$status"
-}
-
-# The daemon does not create a pidfile, and use "-m" to instruct start-stop-daemon to create one.
-start() {
-	logger -s -p daemon.info -t sigmastar "Check MAC for Sigmastar devices"
-	if [ "$(fw_printenv -n ethaddr)" = "00:00:23:34:45:66" ]; then
-		logger -s -p daemon.info -t sigmastar "The eth0 interface has a lousy MAC, let's try to change it.."
-	else
-		logger -s -p daemon.info -t sigmastar "The eth0 interface has a correct MAC - $(fw_printenv -n ethaddr)"
-	fi
-	#
-	logger -s -p daemon.info -t sigmastar "Loading of kernel modules and initialization of the video system has started"
-	export TZ=$(cat /etc/TZ)
-	#load_sigmastar -i
-	#
-	#load_majestic
-}
-
-stop() {
-	printf 'Stopping %s: ' "$DAEMON"
-	[ -f /usr/bin/$DAEMON ] || echo -en "DISABLED, "
-	start-stop-daemon -K -q -p "$PIDFILE"
-	status=$?
-	if [ "$status" -eq 0 ]; then
-		rm -f "$PIDFILE"
-		echo "OK"
-	else
-		echo "FAIL"
-	fi
-	return "$status"
-}
-
-restart() {
-	stop
-	sleep 1
-	reload
-}
-
-reload() {
-	load_majestic
-}
-
-case "$1" in
-	start|stop|restart|reload)
-		"$1";;
-	*)
-		echo "Usage: $0 {start|stop|restart|reload}"
-		exit 1
-esac
\ No newline at end of file
diff --git a/general/package/sigmastar-osdrv-msc313e/sigmastar-osdrv-msc313e.mk b/general/package/sigmastar-osdrv-msc313e/sigmastar-osdrv-msc313e.mk
index 0bfe2849..2456792f 100644
--- a/general/package/sigmastar-osdrv-msc313e/sigmastar-osdrv-msc313e.mk
+++ b/general/package/sigmastar-osdrv-msc313e/sigmastar-osdrv-msc313e.mk
@@ -10,9 +10,6 @@ SIGMASTAR_OSDRV_MSC313E_LICENSE = MIT
 SIGMASTAR_OSDRV_MSC313E_LICENSE_FILES = LICENSE
 
 define SIGMASTAR_OSDRV_MSC313E_INSTALL_TARGET_CMDS
-	$(INSTALL) -m 755 -d $(TARGET_DIR)/etc/init.d
-	$(INSTALL) -m 755 -t $(TARGET_DIR)/etc/init.d $(BR2_EXTERNAL_SIGMASTAR_PATH)/package/sigmastar-osdrv-msc313e/files/script/S95sigmastar
-
 	$(INSTALL) -m 755 -d $(TARGET_DIR)/etc/sensors/iqfile
 	$(INSTALL) -m 644 -t $(TARGET_DIR)/etc/sensors/iqfile $(BR2_EXTERNAL_SIGMASTAR_PATH)/package/sigmastar-osdrv-msc313e/files/sensor/iqfile/*.xml
 	$(INSTALL) -m 644 -t $(TARGET_DIR)/etc/sensors/iqfile $(BR2_EXTERNAL_SIGMASTAR_PATH)/package/sigmastar-osdrv-msc313e/files/sensor/iqfile/f22*.mz
diff --git a/general/package/sigmastar-osdrv-ssc335/files/script/S95sigmastar b/general/package/sigmastar-osdrv-ssc335/files/script/S95sigmastar
deleted file mode 100755
index 35480876..00000000
--- a/general/package/sigmastar-osdrv-ssc335/files/script/S95sigmastar
+++ /dev/null
@@ -1,77 +0,0 @@
-#!/bin/sh
-
-DAEMON="majestic"
-PIDFILE="/var/run/$DAEMON.pid"
-
-DAEMON_ARGS="-s"
-
-# shellcheck source=/dev/null
-[ -r "/etc/default/$DAEMON" ] && . "/etc/default/$DAEMON"
-
-load_majestic() {
-	printf 'Starting %s: ' "$DAEMON"
-	[ -f /usr/bin/$DAEMON ] || echo -en "DISABLED, "
-	# shellcheck disable=SC2086 # we need the word splitting
-	[ -f /etc/coredump.conf ] && . /etc/coredump.conf
-	if [ "$coredump_enabled" ]; then
-		[ "$(yaml-cli -i /etc/majestic.yaml -g .watchdog.timeout)" -lt "30" ] && yaml-cli -i /etc/majestic.yaml -s .watchdog.timeout 30
-		ulimit -c unlimited && echo "|/usr/sbin/sendcoredump.sh" >/proc/sys/kernel/core_pattern
-	fi
-	start-stop-daemon -b -m -S -q -p "$PIDFILE" -x "/usr/bin/$DAEMON" \
-		-- $DAEMON_ARGS
-	status=$?
-	if [ "$status" -eq 0 ]; then
-		echo "OK"
-	else
-		echo "FAIL"
-	fi
-	return "$status"
-}
-
-# The daemon does not create a pidfile, and use "-m" to instruct start-stop-daemon to create one.
-start() {
-	logger -s -p daemon.info -t sigmastar "Check MAC for Sigmastar devices"
-	if [ "$(fw_printenv -n ethaddr)" = "00:00:23:34:45:66" ]; then
-		logger -s -p daemon.info -t sigmastar "The eth0 interface has a lousy MAC, let's try to change it.."
-	else
-		logger -s -p daemon.info -t sigmastar "The eth0 interface has a correct MAC - $(fw_printenv -n ethaddr)"
-	fi
-	#
-	logger -s -p daemon.info -t sigmastar "Loading of kernel modules and initialization of the video system has started"
-	export TZ=$(cat /etc/TZ)
-	load_sigmastar -i
-	#
-	load_majestic
-}
-
-stop() {
-	printf 'Stopping %s: ' "$DAEMON"
-	[ -f /usr/bin/$DAEMON ] || echo -en "DISABLED, "
-	start-stop-daemon -K -q -p "$PIDFILE"
-	status=$?
-	if [ "$status" -eq 0 ]; then
-		rm -f "$PIDFILE"
-		echo "OK"
-	else
-		echo "FAIL"
-	fi
-	return "$status"
-}
-
-restart() {
-	stop
-	sleep 1
-	reload
-}
-
-reload() {
-	load_majestic
-}
-
-case "$1" in
-	start|stop|restart|reload)
-		"$1";;
-	*)
-		echo "Usage: $0 {start|stop|restart|reload}"
-		exit 1
-esac
\ No newline at end of file
diff --git a/general/package/sigmastar-osdrv-ssc335/sigmastar-osdrv-ssc335.mk b/general/package/sigmastar-osdrv-ssc335/sigmastar-osdrv-ssc335.mk
index a43f5519..ee9b0310 100644
--- a/general/package/sigmastar-osdrv-ssc335/sigmastar-osdrv-ssc335.mk
+++ b/general/package/sigmastar-osdrv-ssc335/sigmastar-osdrv-ssc335.mk
@@ -10,9 +10,6 @@ SIGMASTAR_OSDRV_SSC335_LICENSE = MIT
 SIGMASTAR_OSDRV_SSC335_LICENSE_FILES = LICENSE
 
 define SIGMASTAR_OSDRV_SSC335_INSTALL_TARGET_CMDS
-	$(INSTALL) -m 755 -d $(TARGET_DIR)/etc/init.d
-	$(INSTALL) -m 755 -t $(TARGET_DIR)/etc/init.d $(BR2_EXTERNAL_SIGMASTAR_PATH)/package/sigmastar-osdrv-ssc335/files/script/S95sigmastar
-
 	$(INSTALL) -m 755 -d $(TARGET_DIR)/etc/sensors/iqfile
 	$(INSTALL) -m 644 -t $(TARGET_DIR)/etc/sensors/iqfile $(BR2_EXTERNAL_SIGMASTAR_PATH)/package/sigmastar-osdrv-ssc335/files/sensor/iqfile/filter.txt
 	$(INSTALL) -m 644 -t $(TARGET_DIR)/etc/sensors/iqfile $(BR2_EXTERNAL_SIGMASTAR_PATH)/package/sigmastar-osdrv-ssc335/files/sensor/iqfile/imx307_iqfile.bin
diff --git a/general/package/xiongmai-osdrv-xm510/files/script/S95xiongmai b/general/package/xiongmai-osdrv-xm510/files/script/S95xiongmai
deleted file mode 100755
index 9223e85a..00000000
--- a/general/package/xiongmai-osdrv-xm510/files/script/S95xiongmai
+++ /dev/null
@@ -1,81 +0,0 @@
-#!/bin/sh
-
-DAEMON="majestic"
-PIDFILE="/var/run/$DAEMON.pid"
-
-DAEMON_ARGS="-s"
-
-# shellcheck source=/dev/null
-[ -r "/etc/default/$DAEMON" ] && . "/etc/default/$DAEMON"
-
-load_majestic() {
-	printf 'Starting %s: ' "$DAEMON"
-	[ -f /usr/bin/$DAEMON ] || echo -en "DISABLED, "
-	# shellcheck disable=SC2086 # we need the word splitting
-	[ -f /etc/coredump.conf ] && . /etc/coredump.conf
-	if [ "$coredump_enabled" ]; then
-		[ "$(yaml-cli -i /etc/majestic.yaml -g .watchdog.timeout)" -lt "30" ] && yaml-cli -i /etc/majestic.yaml -s .watchdog.timeout 30
-		ulimit -c unlimited && echo "|/usr/sbin/sendcoredump.sh" >/proc/sys/kernel/core_pattern
-	fi
-	start-stop-daemon -b -m -S -q -p "$PIDFILE" -x "/usr/bin/$DAEMON" \
-		-- $DAEMON_ARGS
-	status=$?
-	if [ "$status" -eq 0 ]; then
-		echo "OK"
-	else
-		echo "FAIL"
-	fi
-	return "$status"
-}
-
-# The daemon does not create a pidfile, and use "-m" to instruct start-stop-daemon to create one.
-start() {
-	logger -s -p daemon.info -t xiongmai "Check MAC for Xiongmai devices"
-	if [ "$(fw_printenv -n ethaddr)" = "00:00:23:34:45:66" ]; then
-		logger -s -p daemon.info -t xiongmai "The eth0 interface has a lousy MAC, let's try to change it.."
-		XMMAC="$(ipcinfo --xm-mac)" && [ -n "${XMMAC}" ] && fw_setenv ethaddr ${XMMAC} && reboot -f || logger -s -p daemon.info -t xiongmai "It is not possible to install a new MAC on the eth0 interface.."
-	else
-		logger -s -p daemon.info -t xiongmai "The eth0 interface has a correct MAC - $(fw_printenv -n ethaddr)"
-	fi
-	#
-	logger -s -p daemon.info -t xiongmai "Loading of kernel modules and initialization of the video system has started"
-	export TZ=$(cat /etc/TZ)
-	load_xiongmai -i
-	#
-	SNS_TYPE=$(ipcinfo --short-sensor)
-	logger -s -p daemon.info -t xiongmai "You sensor is $SNS_TYPE"
-	#
-	load_majestic
-}
-
-stop() {
-	printf 'Stopping %s: ' "$DAEMON"
-	[ -f /usr/bin/$DAEMON ] || echo -en "DISABLED, "
-	start-stop-daemon -K -q -p "$PIDFILE"
-	status=$?
-	if [ "$status" -eq 0 ]; then
-		rm -f "$PIDFILE"
-		echo "OK"
-	else
-		echo "FAIL"
-	fi
-	return "$status"
-}
-
-restart() {
-	stop
-	sleep 1
-	reload
-}
-
-reload() {
-	load_majestic
-}
-
-case "$1" in
-	start|stop|restart|reload)
-		"$1";;
-	*)
-		echo "Usage: $0 {start|stop|restart|reload}"
-		exit 1
-esac
diff --git a/general/package/xiongmai-osdrv-xm510/xiongmai-osdrv-xm510.mk b/general/package/xiongmai-osdrv-xm510/xiongmai-osdrv-xm510.mk
index ecebd90d..3546e61f 100644
--- a/general/package/xiongmai-osdrv-xm510/xiongmai-osdrv-xm510.mk
+++ b/general/package/xiongmai-osdrv-xm510/xiongmai-osdrv-xm510.mk
@@ -10,9 +10,6 @@ XIONGMAI_OSDRV_XM510_LICENSE = MIT
 XIONGMAI_OSDRV_XM510_LICENSE_FILES = LICENSE
 
 define XIONGMAI_OSDRV_XM510_INSTALL_TARGET_CMDS
-	$(INSTALL) -m 755 -d $(TARGET_DIR)/etc/init.d
-	$(INSTALL) -m 755 -t $(TARGET_DIR)/etc/init.d $(BR2_EXTERNAL_XIONGMAI_PATH)/package/xiongmai-osdrv-xm510/files/script/S95xiongmai
-
 	# $(INSTALL) -m 755 -d $(TARGET_DIR)/etc/sensors
 	# $(INSTALL) -m 644 -t $(TARGET_DIR)/etc/sensors $(BR2_EXTERNAL_XIONGMAI_PATH)/package/xiongmai-osdrv-xm510/files/sensor/config/*.ini
 
diff --git a/general/package/xiongmai-osdrv-xm530/files/script/S95xiongmai b/general/package/xiongmai-osdrv-xm530/files/script/S95xiongmai
deleted file mode 100755
index ee0ec738..00000000
--- a/general/package/xiongmai-osdrv-xm530/files/script/S95xiongmai
+++ /dev/null
@@ -1,96 +0,0 @@
-#!/bin/sh
-
-DAEMON="majestic"
-PIDFILE="/var/run/$DAEMON.pid"
-
-DAEMON_ARGS="-s"
-
-# shellcheck source=/dev/null
-[ -r "/etc/default/$DAEMON" ] && . "/etc/default/$DAEMON"
-
-load_majestic() {
-	printf 'Starting %s: ' "$DAEMON"
-	[ -f /usr/bin/$DAEMON ] || echo -en "DISABLED, "
-	# shellcheck disable=SC2086 # we need the word splitting
-	[ -f /etc/coredump.conf ] && . /etc/coredump.conf
-	if [ "$coredump_enabled" ]; then
-		[ "$(yaml-cli -i /etc/majestic.yaml -g .watchdog.timeout)" -lt "30" ] && yaml-cli -i /etc/majestic.yaml -s .watchdog.timeout 30
-		ulimit -c unlimited && echo "|/usr/sbin/sendcoredump.sh" >/proc/sys/kernel/core_pattern
-	fi
-	start-stop-daemon -b -m -S -q -p "$PIDFILE" -x "/usr/bin/$DAEMON" \
-		-- $DAEMON_ARGS
-	status=$?
-	if [ "$status" -eq 0 ]; then
-		echo "OK"
-	else
-		echo "FAIL"
-	fi
-	return "$status"
-}
-
-# The daemon does not create a pidfile, and use "-m" to instruct start-stop-daemon to create one.
-start() {
-	logger -s -p daemon.info -t xiongmai "Check MAC for Xiongmai devices"
-	if [ "$(fw_printenv -n ethaddr)" = "00:00:23:34:45:66" ]; then
-		logger -s -p daemon.info -t xiongmai "The eth0 interface has a lousy MAC, let's try to change it.."
-		XMMAC="$(ipcinfo --xm-mac)" && [ -n "${XMMAC}" ] && fw_setenv ethaddr ${XMMAC} && reboot -f || logger -s -p daemon.info -t xiongmai "It is not possible to install a new MAC on the eth0 interface.."
-	else
-		logger -s -p daemon.info -t xiongmai "The eth0 interface has a correct MAC - $(fw_printenv -n ethaddr)"
-	fi
-	#
-	logger -s -p daemon.info -t xiongmai "Loading of kernel modules and initialization of the video system has started"
-	export TZ=$(cat /etc/TZ)
-	load_xiongmai -i
-	#
-	if [ ! -f /usr/lib/libsns.so ]; then
-		SNS_TYPE=$(ipcinfo --short-sensor)
-		logger -s -p daemon.info -t xiongmai "You sensor is $SNS_TYPE and symlink to libsns.so not found"
-		case $SNS_TYPE in
-
-		imx335|sc335e)
-			logger -s -p daemon.info -t xiongmai "Create new symlink to libsns_X50_XM530.so";
-			ln -sf /usr/lib/sensors/libsns_X50_XM530.so /usr/lib/libsns.so;
-			;;
-
-		*)
-			logger -s -p daemon.info -t xiongmai "Create new symlink to libsns_X123_XM530.so";
-			ln -sf /usr/lib/sensors/libsns_X123_XM530.so /usr/lib/libsns.so;
-			;;
-		esac
-	fi
-	#
-	load_majestic
-}
-
-stop() {
-	printf 'Stopping %s: ' "$DAEMON"
-	[ -f /usr/bin/$DAEMON ] || echo -en "DISABLED, "
-	start-stop-daemon -K -q -p "$PIDFILE"
-	status=$?
-	if [ "$status" -eq 0 ]; then
-		rm -f "$PIDFILE"
-		echo "OK"
-	else
-		echo "FAIL"
-	fi
-	return "$status"
-}
-
-restart() {
-	stop
-	sleep 1
-	reload
-}
-
-reload() {
-	load_majestic
-}
-
-case "$1" in
-	start|stop|restart|reload)
-		"$1";;
-	*)
-		echo "Usage: $0 {start|stop|restart|reload}"
-		exit 1
-esac
-
diff --git a/general/package/xiongmai-osdrv-xm530/files/script/load_xiongmai b/general/package/xiongmai-osdrv-xm530/files/script/load_xiongmai
index ef1868fd..9ce81686 100755
--- a/general/package/xiongmai-osdrv-xm530/files/script/load_xiongmai
+++ b/general/package/xiongmai-osdrv-xm530/files/script/load_xiongmai
@@ -108,6 +108,23 @@ remove_ko()
 	remove_sns
 }
 
+make_symlink() {
+if [ ! -f /usr/lib/libsns.so ]; then
+	SNS_TYPE=$(ipcinfo --short-sensor)
+	logger -s -p daemon.info -t xiongmai "You sensor is $SNS_TYPE and symlink to libsns.so not found"
+	case $SNS_TYPE in
+	imx335|sc335e)
+		logger -s -p daemon.info -t xiongmai "Create new symlink to libsns_X50_XM530.so"
+		ln -sf /usr/lib/sensors/libsns_X50_XM530.so /usr/lib/libsns.so
+		;;
+	*)
+		logger -s -p daemon.info -t xiongmai "Create new symlink to libsns_X123_XM530.so"
+		ln -sf /usr/lib/sensors/libsns_X123_XM530.so /usr/lib/libsns.so
+		;;
+	esac
+fi
+}
+
 load_usage()
 {
 	echo "Usage:  ./loadxm530 [-option]"
@@ -123,6 +140,7 @@ if [ "$1" = "-i" ]
 then
 cd /lib/modules/3.10.103\+/xiongmai
 insert_ko
+make_symlink
 fi
 
 if [ "$1" = "-r" ]
@@ -141,4 +159,3 @@ then
 remove_ko
 insert_ko
 fi
-
diff --git a/general/package/xiongmai-osdrv-xm530/xiongmai-osdrv-xm530.mk b/general/package/xiongmai-osdrv-xm530/xiongmai-osdrv-xm530.mk
index 72df1504..a8bdbc66 100644
--- a/general/package/xiongmai-osdrv-xm530/xiongmai-osdrv-xm530.mk
+++ b/general/package/xiongmai-osdrv-xm530/xiongmai-osdrv-xm530.mk
@@ -10,9 +10,6 @@ XIONGMAI_OSDRV_XM530_LICENSE = MIT
 XIONGMAI_OSDRV_XM530_LICENSE_FILES = LICENSE
 
 define XIONGMAI_OSDRV_XM530_INSTALL_TARGET_CMDS
-	$(INSTALL) -m 755 -d $(TARGET_DIR)/etc/init.d
-	$(INSTALL) -m 755 -t $(TARGET_DIR)/etc/init.d $(BR2_EXTERNAL_XIONGMAI_PATH)/package/xiongmai-osdrv-xm530/files/script/S95xiongmai
-
 	$(INSTALL) -m 755 -d $(TARGET_DIR)/etc/sensors
 	# $(INSTALL) -m 644 -t $(TARGET_DIR)/etc/sensors $(BR2_EXTERNAL_XIONGMAI_PATH)/package/xiongmai-osdrv-xm530/files/sensor/config/*.ini