From 0f151c1d29fca98836e0458d4ec79c5b2ee5e590 Mon Sep 17 00:00:00 2001
From: Huang jinlong <33887488+longcat99@users.noreply.github.com>
Date: Fri, 6 Dec 2024 20:50:55 +0800
Subject: [PATCH] Add files via upload
---
.../workflows/openipc-ssc338q-fpv-image.yml | 68 +++++++++++++++++++
1 file changed, 68 insertions(+)
create mode 100644 .github/workflows/openipc-ssc338q-fpv-image.yml
diff --git a/.github/workflows/openipc-ssc338q-fpv-image.yml b/.github/workflows/openipc-ssc338q-fpv-image.yml
new file mode 100644
index 00000000..871b2a78
--- /dev/null
+++ b/.github/workflows/openipc-ssc338q-fpv-image.yml
@@ -0,0 +1,68 @@
+name: image
+on:
+ schedule:
+ - cron: '30 23 * * *' # 每天 UTC 时间 23:30 触发
+ workflow_dispatch: # 支持手动触发
+
+env:
+ SIGMASTAR: ssc338q
+ TAG_NAME: openipc-ssc338q-fpv-image
+
+jobs:
+ toolchain:
+ name: Image
+ runs-on: ubuntu-latest
+ steps:
+ - name: Prepare
+ run: |
+ link=https://github.com/openipc/firmware/releases/download/openipc-ssc338q-fpv
+ create() {
+ uboot=u-boot-$1-nor.bin
+ firmware=openipc.$2-nor-$3.tgz
+ release=target/openipc-$1-nor-$3.bin
+
+ mkdir -p output target
+ # 下载 U-Boot 文件
+ if ! wget -nv $link/$uboot -O output/$1.bin; then
+ echo -e "Download failed: $link/$uboot\n"
+ return 0
+ fi
+
+ # 下载固件文件
+ if ! wget -nv $link/$firmware -O output/$2.tgz; then
+ echo -e "Download failed: $link/$firmware\n"
+ return 0
+ fi
+
+ # 解压固件
+ tar -xf output/$2.tgz -C output
+
+ # 初始化固件文件，填充为 16MB 的 0xFF
+ dd if=/dev/zero bs=1K count=16384 status=none | tr '\000' '\377' > $release
+
+ # 写入 U-Boot (256KB)
+ dd if=output/$1.bin of=$release bs=1K seek=0 conv=notrunc status=none
+
+ # 写入内核镜像 (3072KB，从 320KB 开始)
+ dd if=output/uImage.$2 of=$release bs=1K seek=320 conv=notrunc status=none
+
+ # 写入根文件系统 (9600KB，从 3392KB 开始)
+ dd if=output/rootfs.squashfs.$2 of=$release bs=1K seek=3392 conv=notrunc status=none
+
+ # 清理临时文件夹
+ rm -rf output
+
+ echo -e "Created: $release\n"
+ }
+
+ # 按 SOC 类型生成固件
+ for soc in $SIGMASTAR ; do
+ create $soc $soc fpv
+ done
+
+ - name: Upload
+ uses: softprops/action-gh-release@v2
+ with:
+ tag_name: ${{ env.TAG_NAME }}
+ make_latest: false
+ files: target/*.bin